Abstract:In horizontal-tube falling film evaporation (HFFE), the heat transfer processes inside and outside the tube interact with each other and collectively determine the overall heat transfer efficiency. To better understand this process, a three-dimensional model considering the condensation process inside the tube was built to simulate the process of HFFE. The Tanasawa model was used to calculate the evaporation flux. A novel model of non-uniform heat flux distribution was proposed for considering the coupling between heat transfer and phase transition process on the both sides of the tube. The dimensionless axial distance (L*) which represents the distance from the specific cross-section to the central axis of the liquid column is introduced to analyze of parameters distribution along the axial direction. The impact of steam quality (x), steam mass flow rate (G) inside the tube and apparent temperature difference for heat transfer (Delta T-a) on film thickness (delta) and heat transfer coefficient outside the tube (h(o)) at L* = 0.0, 0.25 and 0.5 was investigated. The calculation parameters are as follows: 0.2 <= x <= 1.0, 2 <= G <= 6 kg/(m(2).s) and 2.0 <= Delta T-a <= 5.0 K. The simulation shows that delta and h outside the tube are distributed significantly inhomogeneously. As x increases from 0.2 to 1.0, the average heat transfer coefficient ((h) over bar (o)) at three L* increases by 9.85 %, 10.77 % and 17.95 %, which is mainly due to the expansion of liquid accumulation section and the increase in h of this section. As G increases, (h) over bar (o) outside the tube for filmwise condensation section decreases whereas that for liquid accumulation increases. The value of h outside the tube at three L* increase with an increase in Delta T-a.

A Simple Heat Transfer Model for Laminar Film Condensation of Superheated Vapours on A Vertical Plate

Thin liquid film flow and heat transfer under spray impingement

Theoretical Analysis of Film Condensation Heat Transfer Inside Vertical Mini Triangular Channels

Development and Evaluation of Mass Transfer Model for Film Condensation Simulation

Experimental Study on Film Condensation of Superheated Vapour on a Horizontal Tube

Heat transfer model of thermosyphon condenser based on dropwise and film co-existing condensation theory

Numerical Simulations of Laminar Film Condensation of H2O/Air or H2O/CO2 on a Vertical Plate

Heat Transfer Characteristics of Complete Condensation in Vertical Tube

Analysis of enhanced heat transfer of film condensation on vertical fluted tubes

Theoretical Modeling of Vapor Condensation in the Presence of Noncondensable Gas on a Horizontal Tube

An improved mass transfer model for film condensation numerical simulation

Development of an Analytical Model for Pure Vapor Downflow Condensation in a Vertical Tube

Numerical analysis and experimental investigation for enhanced heat transfer of film condensation on a rectangular flute

Laminar forced convection heat and mass transfer of humid air across a vertical plate with condensation

Theoretical study of superheated vapor effect on liquid film condensation in a saturated porous medium using Forchheimer's model

Numerical Study of Heat Transfer Characteristics of Horizontal-Tube Falling Film Evaporation Process Coupling Condensation Inside the Tube

A dynamic model for predicting condensation heat and mass transfer characteristics in falling film condenser

A Numerical Model for the Flow Condensation of the Binary Zeotropic Mixture

Modeling Analysis of Moist Air Condensation on a Plate under Forced Convection Conditions

Numerical Model of Heat and Mass Transfer During Moist Air Condensing on Cold Plane Metal Plate

Numerical simulation of heat and mass transfer in plate-type evaporative condenser