Abstract:Insulation degradation in power components is a looming issue that can have a significant impact on the reliability of power system if not attended timely. Partial discharge (PD) diagnostics is a key technique used for the condition monitoring and health assessment of insulation. Inception of PD is a primary indicator which shows degradation and decreased local dielectric strength of the insulation. PD magnitude can increase with time and level of stress, which may result in failure of insulation. This article investigates the behavior of PD characteristics in a medium voltage (MV) cross-linked polyethylene (XLPE) cable sample, containing a defect at the cable termination, under elevated electrical stresses. PD behavior is studied by investigating the key PD characteristics, such as partial discharge inception voltage (PDIV) , phase of occurrence (ɸ) , mean amplitude (V mean ) , pulse repetition rate (PRR) , and phase span ( ɸ span ). These quantities are extracted from a phase-resolved partial discharge (PRPD) pattern using a pulse detection algorithm. Later, these characteristics are analyzed in correlation with the electrical stress. Various regression models are implemented and compared to find the best fit model that represents trending attributes of major PD characteristics. The presented study can be used as an effective process to analyze the measured PD data for evaluation of the insulation condition in the power components.

Study on Partial Discharge Characteristic in XLPE Accessory Based on Pulse Sequence Analysis

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

Study on Characteristics of Partial Discharge in Xlpe Cable under Damped Ac Voltage at Different Frequencies

Measurement and analysis of partial discharge in XLPE power cable based on ultrasonic

Radio-frequency Detection of Partial Discharge in Power Cable Joints

A Comparative Study on Partial Discharge Characteristics for XLPE Cable.

Comparative Study on Partial Discharge Characteristics of XLPE Cable under Damped Oscillating Wave Voltage and AC Voltage

Study on Partial Discharge Pulse Attenuation Characteristics in 110 Kv Xlpe Power Cable

Time-frequency Characteristic Based Partial Discharge Pulses Identification Technique for the High Voltage XLPE Power Cables

Characteristics of Partial Discharge in Cross-Linked Polyethylene Insulation Cable under Damped Ac Voltage

Review on Detection and Analysis of Partial Discharge along Power Cables

Propagation Characteristics of Partial Discharge Pulses in the Cable

The Application of Partial Discharge Detection for the Condition Assessment of Xlpe Power Cables

Partial Discharge Pattern Recognition of XLPE Cables at DC Voltage Based on the Compressed Sensing Theory

A Thermal Excitation Based Partial Discharge Detection Method for Cable Accessory

Detection Method Of Partial Discharge In Xlpe Cable Accessories Based On The Method Of Vhf Combined With Acoustic Emission

Partial discharge detection in XLPE power cable with CT sensor

Investigation of partial discharge characteristics in XLPE cable insulation under increasing electrical stress

EXPERIMENTAL STUDY ON THE PROPAGATION CHARACTERISTICS OF THE PD PULSE IN XLPE POWER CABLE

Simulation Of Partial Discharge Propagation Characteristics In Xlpe Cables And Joints

Studies on electric field distribution and partial discharges of XLPE cable at DC voltage