Abstract:In recent years, to achieve favorable tribological characteristics, surface texture technology for friction reduction has been extensively studied, and its effectiveness has been successfully validated. The quality of surface texture processing directly impacts the tribological performance of finger seal friction pairs. To investigate the influence of the laser process parameters on the finger seal surface texture of the GH4169 and improve its processability and process predictability, a comparative experiment and analysis involving multiple processing parameters, including the laser power (P), laser frequency (F), scanning speed (V), and scanning times (N), were conducted. To evaluate the quality of laser surface texturing processing technology, four processing morphology parameters were established. Uniform experiments and regression analysis were employed to analyze the influence and synergistic effects of laser processing parameters on processing quality. The research results indicate that laser power, scanning times, and scanning speed are the main process parameters that significantly affect laser surface deformation. The outer diameter is directly proportional to the laser power and inversely proportional to the scanning speed; the bottom diameter ratio is directly proportional to both the laser power and scanning times; and the pit depth initially increases and then decreases with increasing laser power and scanning times. The suitable range of processing parameters is as follows: laser power (10~20%), speed range (400~700 mm/s), scanning times (8~18 times), and laser frequency (20~25 kHz). This research provides theoretical and experimental support for the precise control of surface texture prepared by laser processing of GH4169, laying the foundation for friction and wear tests of textured finger seals.

Research of femtosecond laser processing texture and influence of texture on tribological properties

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Laser Surface Texturing of Stainless Steel − Effect of Pulse Duration on Texture's Morphology and Frictional Response

Improvement of current-carrying tribological behaviour via laser surface texture

Evaluation of tribological performance for laser textured surfaces with diverse wettabilities under water/oil lubrication environments

Hierarchical microtextures generated by pulsed-laser manufacturing for surface geometry modulation

Analysis of synergistic friction reduction effect on micro-textured cemented carbide surface by laser processing

The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves

Femtosecond Laser Texturing of Surfaces for Tribological Applications

Effect of ion beam etching on the tribological performance of laser textured Co-Cr-Mo alloy

Influence of typical technological parameters on the processing quality of laser surface texturing technology for finger sealing

Laser Melting and Surface Texture Technology: Effect on Friction Properties

Investigations on femtosecond laser modified micro-textured surface with anti-friction property on bearing steel GCr15

Investigation on anisotropic tribological properties of superhydrophobic/superlipophilic lead bronze surface textured by femtosecond laser

Effect of Nanosecond Laser Texturization on Tribological Behavior of AISI 321 Stainless Steel

Fabrication and tribological characterization of laser textured engineering ceramics: Si3N4, SiC and ZrO2

Effect of laser preparation strategy on surface wettability and tribological properties under starved lubrication

An Experimental Investigation of Tribological Performance of Triangular Textures in Water Lubrication Regime

Research in Improving Tribology Performance by Surface Texturing

Micro-dimple Surface Texture Picosecond Laser Processing and Tribological Properties

Investigation of mountainous laser texturing for improving the adhesion and tribological properties of AlCrN coatings