Abstract:The model of ball-on-disk test was established and three kinds of textures with different geometric characteristics were designed on the surface of the cemented carbide disk. The optimal geometric characteristic of texture was obtained by finite element analysis. The hole-textures of different parameters were processed on the surface of the cemented carbide disk by laser machining. The effects of texture and lubricant on friction and wear behaviour were analysed by comparing four different cemented carbide disks through the ball-on-disk contrast tests. Ball-on-disk orthogonal tests were carried out to obtain the best geometric parameters of the hole-texture. The results of numerical simulation showed that the wear depth of the hole-texture disk was the smallest among all three different textured disks. The results of contrast tests showed that the texture filled with lubricant could effectively improve the friction and wear of cemented carbide disk in dry sliding against TC4 titanium alloy balls. It was found that the adhesion of the surface textured cemented carbide disk was the most serious and the adhesion of the surface textured cemented carbide disk with lubricant filled into the textures was the lowest among four tested samples, which indicated that the texture could significantly increase the adhesion of titanium alloy to the surface of cemented carbide disk, while the solid lubricant could effectively reduce it. Meanwhile, the main effect mechanisms of textures were also discussed. In addition, the best geometric parameters of the texture were determined to be 100 pm in diameter, 80 pm in depth and 600 pm in spacing through orthogonal tests. It was also found that the spacing had the greatest effect on the friction coefficient and the wear volume, and the friction coefficient and the wear volume decreased with the increasing of the spacing.

Analysis of synergistic friction reduction effect on micro-textured cemented carbide surface by laser processing

Friction, Wear, and Fatigue Analysis for Micro-Textured Cemented Carbide

Tribological Properties of Micro-Groove Cemented Carbide by Laser Processing

Thermal Effect Analysis of Laser Processing Cemented Carbide Micro-texture

Wear Life Prediction of Cemented Carbide Microtextured Surface

Effect of laser surface micro-modeling on tribological properties

Study of Laser Surface Texturing for Improving Tribological Properties

Laser Micro-Cladding in Situ Forming Textured Surface to Improve the Tribological Performance

Laser Melting and Surface Texture Technology: Effect on Friction Properties

Study on the Friction-Reducing Mechanisms of Surface Texture Cemented Carbide under Dry Sliding

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

FEATURES OF LASER-MACHINED MICRO-TEXTURES ON THE SURFACE OF CEMENTED CARBIDE TOOL

Experimental Study of the Effect of Surface Texturing on the Lubrication Performance in Point Contacts

A Study on Micro-Pit Texture Parameter Optimization and Its Tribological Properties

Numerical Simulation and Experimental Investigation on Friction and Wear Behaviour of Micro-Textured Cemented Carbide in Dry Sliding Against TC4 Titanium Alloy Balls

Fabrication of Interference Textures on Cemented Carbides Using Nanosecond and Femtosecond Laser Pulses

Optimization of Tribological Characteristics of a Combined Pattern Textured Surface Using Taguchi Design

Effect of ceramic surface texture on the tribological property of ceramics and carbon fiber reinforced silicon carbide ceramic matrix composite (C/SiC)

Wettability-Oriented Laser Microgrooving Process on Cemented Carbide Surface

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Effect of picosecond laser texturing on the friction behavior of silicon carbide in hybrid ceramic bearings under dry and water lubrication