Abstract:Studying the tribological behavior between diamond materials and ceramics is crucial for understanding the grinding mechanism of diamond wheels on ceramics. To comprehend the tribological characteristics between diamond materials and various ceramics, this paper presents a comparative study of the tribological behaviors of Al2O3, AlN, Si3N4, and ZrO2 ceramics sliding against polycrystalline diamond (PCD) balls. The dependence of the coefficient of friction (COF), wear characteristics as well as the surface morphology of different ceramics and SiC-bonded PCD balls on load, sliding stage were examined. The effect of nanofluids on the COF and wear of different ceramics was also investigated. The results showed that the tribological characteristics of ceramic materials are strongly dependent on mechanical properties. Al2O3 and AlN ceramics with lower fracture toughness exhibit a significantly higher COF and wear volume than that of Si3N4 and ZrO2 ceramics. Al2O3 presents the highest COF (0.38) and wear volume, and Si3N4 owns the lowest COF (0.08) and wear volume under the load of 9.8 N. By examining the wear grooves of different ceramics, it is found that Al2O3 and AlN ceramics own larger debris than that of Si3N4 and ZrO2, which also causes more smearing on the ceramic and adhesion of wear debris to the SiC-bonded PCD ball for Al2O3 and AlN. Under lubricants, the COFs and the adhesion of wear debris are effectively reduced, and the wear rate of the ceramic is increased. There is little difference between deionized (DI) water and nanofluids on the effect of lubricants on COF for Al2O3 and AlN. However, for ceramics with higher fracture toughness, the nanofluids can reduce the COFs of Si3N4 and ZrO2 in comparison with DI water.

Fabrication and tribological characterization of laser textured engineering ceramics: Si3N4, SiC and ZrO2

Effect of ceramic surface texture on the tribological property of ceramics and carbon fiber reinforced silicon carbide ceramic matrix composite (C/SiC)

Wettability Surface and Friction Characterisation of ZrO2 Ceramics by Femtosecond Laser Texturing

Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic

Effect of Surface Modification on Wettability and Tribology by Laser Texturing in Al2O3.

Tribological Properties of Micro-Textured Surfaces of ZTA Ceramic Nanocomposites under the Combined Effect of Test Conditions and Environments

Tribological behavior of zirconia ceramic with micro-channels produced by nanosecond laser

Effect of laser surface textures combined with multi-solid lubricant coatings on the tribological properties of Al 2 O 3 /TiC ceramic

Surface Modification and Effects on Tribology by Laser Texturing in Al2O3.

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Effect of picosecond laser texturing on the friction behavior of silicon carbide in hybrid ceramic bearings under dry and water lubrication

Surface 3-D Lubrication Structure Design of Al2O3/Ni-laminated Ceramics to Improve Tribological Properties under Combined Environments

An Experimental Investigation of Tribological Performance of Triangular Textures in Water Lubrication Regime

Fabrication and Tribological Properties of the Laser Textured SiC Cylinders with Diamond Coating

A comparative study on tribological behavior of Al2O3, AlN, Si3N4 and ZrO2 ceramics sliding against polycrystalline diamond ball

Effects of Single- and Multi-Shape Laser-Textured Surfaces on Tribological Properties under Dry Friction

Toward the Mechanisms of Surface Texturing on the Wear Behavior of Dental Zirconia Ceramics under Dry and Saliva Lubricated Conditions

Tribological Properties of Laser Surface Texturing and Coating Duplex-Treated Surface

Evaluation of tribological performance for laser textured surfaces with diverse wettabilities under water/oil lubrication environments

Influence of nanosecond laser processed surface textures on the tribological characteristics of diamond films sliding against zirconia bioceramic

Fabrication and mechanical measurements of micro- and nano-textured surfaces induced by laser processing