Abstract:To improve the accuracy and response time of closed-loop control of laser solid forming (LSF) process, it is important to master the effects of processing parameters on the deposition dimensions and mechanical parameters. In this paper, the influences of processing parameters, such as laser power, traverse speed, laser spot diameter, powder feeding rate, shielding gas flow rate on the deposition dimension parameters were investigated. It is found that the deposition height is mainly affected by the mass input of molten pool, namely, powder feeding rate and traverse velocity, especially the powder feeding rate. And the deposition width is mainly affected by the energy input such as, spot diameter, traverse speed and the energy density, among which the spot diameter and traverse speed are of greater influence. A series of transfer functions were built to quantitatively correlate the dependence of deposition layer dimension parameters on the processing parameters. The transfer function model shows a good agreement with the experimental results.To improve the accuracy and response time of closed-loop control of laser solid forming (LSF) process, it is important to master the effects of processing parameters on the deposition dimensions and mechanical parameters. In this paper, the influences of processing parameters, such as laser power, traverse speed, laser spot diameter, powder feeding rate, shielding gas flow rate on the deposition dimension parameters were investigated. It is found that the deposition height is mainly affected by the mass input of molten pool, namely, powder feeding rate and traverse velocity, especially the powder feeding rate. And the deposition width is mainly affected by the energy input such as, spot diameter, traverse speed and the energy density, among which the spot diameter and traverse speed are of greater influence. A series of transfer functions were built to quantitatively correlate the dependence of deposition layer dimension parameters on the processing parameters. The transfer function model shows a good agr...

Influence of typical technological parameters on the processing quality of laser surface texturing technology for finger sealing

The effect of laser surface texturing on frictional performance of face seal

Surface characterization and alternate of related technological parameters for LST

Effect of Process Parameters on the Hardness of Laser Surface Textured 5A06 Aluminum Alloy

Surface Texturing with Laser Multiple-Spot Scanning Technology

Analysis of synergistic friction reduction effect on micro-textured cemented carbide surface by laser processing

Study of Laser Surface Texturing for Improving Tribological Properties

Effect Of Pulse Duration On Tribological Behavior Of Textured Stainless Steel By Laser Surface Texturing

Tribological Influence of Laser Surface Textures on 45 Steel under Dry Sliding

Research of femtosecond laser processing texture and influence of texture on tribological properties

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Laser Surface Texturing of Stainless Steel − Effect of Pulse Duration on Texture's Morphology and Frictional Response

Improvement of current-carrying tribological behaviour via laser surface texture

Effect of laser surface micro-modeling on tribological properties

Fabrication and mechanical measurements of micro- and nano-textured surfaces induced by laser processing

Laser Surface-micropored Improving Tribological Properties of Face Seals

Processing Parameters Study of Closed-Loop Laser Solid Forming

Surface Modification and Effects on Tribology by Laser Texturing in Al2O3.

Effects of Single- and Multi-Shape Laser-Textured Surfaces on Tribological Properties under Dry Friction

Optimization of Tribological Characteristics of a Combined Pattern Textured Surface Using Taguchi Design

Influence of microtextured parameters of dry gas sealing rings on tribological performance