Abstract:Laser-induced damage of fused silica optics at 351 nm is a key factor limiting the output energy of high-power laser facility, especially the damage growth process. A comprehensive understanding of its damage growth behavior is of critical importance for high-power laser facility. Thus we study the laser-induced damage growth on the exit surface of fused silica under the subsequent illumination of 5 ns square pulses at 351 nm on a large-aperture high-power laser facility. Experiment is conducted with a 36 cm thick UV grade fused silica focus lens in clean atmosphere and at room temperature. 56 laser shots of 3 fluence in a range from 0.1 J/cm2 to 8.1 J/cm2 are fired during the experiment. And the damage initiation process and growth process are monitored and recorded with an online optics damage inspection instrument which has an optical resolution of about 50 m. Experimental results demonstrate that the sizes of exit-surface damage sites exponentially or linearly grow with laser shots and the damage growth rate increases with laser fluence. However, it is found that even under the same laser conditions the damage grow rate is not a fixed value, which means that besides the laser fluence other parameters also influence the damage grow process. In order to highlight some tendencies, we consider the single-shot damage growth rate and calculate the average of inside fluence bins. Statistical analysis shows that smaller sites tend to grow with larger growth rates than larger sites under the irradiation of the same laser fluence. This result indicates that damage growth rate is influenced by both laser fluence and damage site size. It suggests that the damage growth rule needs to be incorporated into a size-dependent growth effect. The result that higher growth rates are obtained for small damage sites may be related to the damage growth mechanism of fused silica. Damage crater of fused silica consists of a central core and numerous surrounding cracks. The defects in the central core absorb laser energy and yield plasma, then the plasma pressure will open the cracks on the periphery of the crater and lead to lateral and axial expansion of cracks which can be identified as damage growth. The fact that smaller sites grow faster than larger sites implies that smaller sites more efficiently couple laser energy into fracture energy. Our results have important implications for both the prediction of fused silica optics lifetime and the fundamental understanding of laser damage mechanism.

Study of growth of laser initiated damage in fused silica at 3ω

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility

Growth of Laser Initial Damage in Conditioned Fused Silica at 355 Nm

Behavior of 355 nm laser-induced damage growth in fused silica

Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 Nm

Effects of Pre-Conditioning on 355 Nm Laser-Induced Damage Growth of Fused Silica

Laser-induced damage growth of large-aperture fused silica optics under high-fluence 351 nm laser irradiation

Investigation of Stress Wave and Damage Morphology Growth Generated by Laser-Induced Damage on Rear Surface of Fused Silica.

Dynamics of filamentary damage induced by nanosecond laser in fused silica

Development of Damage Growth Mitigation in Fused Silica by CO2 Laser

Characterization of 355 Nm Laser-Induced Damage of Mitigated Damage Sites in Fused Silica

Surface Evolution and Laser Damage Resistance of CO2 Laser Irradiated Area of Fused Silica

Damage Induced 0n Fused Silica by Fundamental Frequency and Third Harmonic of Nd:YAG Laser

Study on damage characteristics of fused silica glass induced by plasma shock wave with finite element method

Mitigation of Laser Damage Growth in Fused Silica by Using A Non-Evaporative Technique

Numerical simulation of the modulation to incident laser by the repaired damage site in a fused silica subsurface

Laser Induced Damage in Fused Silica for 248 nm

Bulk Damage and Stress Behavior of Fused Silica Irradiated by Nanosecond Laser

Stainless Steel Film's Contamination Effects on Laser-Induced Damage to Fused Silica Surface

Time-resolved Dynamics of 355-Nm Laser-Irradiated Surface Damage on Fused Silica

Incident Laser Modulation of a Repaired Damage Site with a Rim in Fused Silica Rear Subsurface