Abstract:Laser-induced damage of fused silica optics at 351 nm is a key factor limiting the output energy of high-power laser facility, especially the damage growth process. A comprehensive understanding of its damage growth behavior is of critical importance for high-power laser facility. Thus we study the laser-induced damage growth on the exit surface of fused silica under the subsequent illumination of 5 ns square pulses at 351 nm on a large-aperture high-power laser facility. Experiment is conducted with a 36 cm thick UV grade fused silica focus lens in clean atmosphere and at room temperature. 56 laser shots of 3 fluence in a range from 0.1 J/cm2 to 8.1 J/cm2 are fired during the experiment. And the damage initiation process and growth process are monitored and recorded with an online optics damage inspection instrument which has an optical resolution of about 50 m. Experimental results demonstrate that the sizes of exit-surface damage sites exponentially or linearly grow with laser shots and the damage growth rate increases with laser fluence. However, it is found that even under the same laser conditions the damage grow rate is not a fixed value, which means that besides the laser fluence other parameters also influence the damage grow process. In order to highlight some tendencies, we consider the single-shot damage growth rate and calculate the average of inside fluence bins. Statistical analysis shows that smaller sites tend to grow with larger growth rates than larger sites under the irradiation of the same laser fluence. This result indicates that damage growth rate is influenced by both laser fluence and damage site size. It suggests that the damage growth rule needs to be incorporated into a size-dependent growth effect. The result that higher growth rates are obtained for small damage sites may be related to the damage growth mechanism of fused silica. Damage crater of fused silica consists of a central core and numerous surrounding cracks. The defects in the central core absorb laser energy and yield plasma, then the plasma pressure will open the cracks on the periphery of the crater and lead to lateral and axial expansion of cracks which can be identified as damage growth. The fact that smaller sites grow faster than larger sites implies that smaller sites more efficiently couple laser energy into fracture energy. Our results have important implications for both the prediction of fused silica optics lifetime and the fundamental understanding of laser damage mechanism.

Stainless Steel Film's Contamination Effects on Laser-Induced Damage to Fused Silica Surface

Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 Nm

Laser Damage Induced by Contamination Particles on Coated Optical Components

Effect of laser ablation on the conductivity and laser-induced damage threshold of fused silica components

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility

Ab Initio Molecular Dynamics Simulation of the Effect of Impurities on Laser-Induced Damage of Fused Silica

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Effect of Polishing-Induced Subsurface Impurity Defects on Laser Damage Resistance of Fused Silica Optics and Their Removal with Hf Acid Etching

Laser Induced Damage in Fused Silica for 248 nm

Damage Behaviors of Silica Microparticles on Fused Silica Optics under 355 Nm High Fluence Laser

Damage Morphologies of Al2O3 and Fe Particles Attached on the Input Surface of Fused Silica after Irradiation by a 355 Nm Laser.

Behavior of 355 nm laser-induced damage growth in fused silica

Laser-induced damage growth of large-aperture fused silica optics under high-fluence 351 nm laser irradiation

Effects of Pre-Conditioning on 355 Nm Laser-Induced Damage Growth of Fused Silica

Characterization of 355 Nm Laser-Induced Damage of Mitigated Damage Sites in Fused Silica

Effect of residual stress on laser-induced damage characterization of mitigated damage sites in fused silica

Correlation Between Photoluminescence Properties of Surface Defects and Laser-Induced Damage Threshold of Fused Silica

Spatial Sputtering of Fused Silica after a Laser-Induced Exploding Caused by a 355 Nm Nd: YAG Laser

Optical characterization and laser damage of fused silica optics after ion beam sputtering

Effects of Acid-Etching Depth on 355 Nm Laser-Induced Damage Threshold of Fused Silica

Surface Defects, Stress Evolution, and Laser Damage Enhancement Mechanism of Fused Silica under Oxygen-Enriched Condition