Abstract:The eddy-current method has been employed to realize the real-time measurement of thickness distribution and polishing endpoint detection of metal films during the metal chemical mechanical polishing (CMP) process. However, accuracy and sensitivity in thickness measurement can be significantly impacted by a variation in lift-off distance (about 3.5 mm), attributable to the progressive wear of the polishing pad. This paper proposes a novel triple-coil sensor system, integrated with an alternating-current bridge and designed for high-precision metal film thickness measurement. Subsequently, the measurement performance of the bridge output voltage was scrutinized using a theoretical model and a trans-dimensional finite element analysis model of electromagnetic fields and circuit coupling. The correlations between the amplitude, phase, and the ratio of the real part to the imaginary part of the output voltage, in context with film thickness, were determined at assorted excitation frequencies and lift-off distances. Both theoretical equations and simulation results affirmed that the phase and ratio were more resistant to lift-off distance variations than the amplitude, and a linear relationship was identified between the ratio and film thickness. Furthermore, the thickness measurement performance of the amplitude and phase, when the triple-coil was imbalanced, was dissected via numerical simulation. A profound understanding of the proposed system was provided and beneficial for the practical applications in real-time thickness measurements of metal films during the metal CMP process.

Meniscus Coating and Thickness Measurement of Photoresist

Spectrophotometer for Measuring Spectral Transmittance and Reflectance of Large Aperture Optical Element

Uncertainty Analysis of Slot Die Coater Gap Width Measurement by Using A Shear Mode Micro-Probing System

1511 Micro-probing System for Slit Width Measurement by Using a Shear-Force Detection

A New Method for Measuring Multilayer Thickness Using a Chromatic Confocal Sensor

White Light Microscopic Spectral Interferometric Measuring Method Based on Linnik Type

Measuring Spectral Reflectance and Transmittance of Heavy Caliber Optical Thin-Film

An Interferometer for Measuring Thickness and Spacing

A Measuring System of Film Thickness Based on Atomic Force Microscope

A System for Measurement of Line Width by Combining Polarization Interferometry with Confocal Microscopy

A new method for high resolution curvature measurement applied to stress monitoring in thin films

Thickness Distribution Measurement for Spin-Coated and Inkjet-Printed Transparent Organic Layers Using a UV Light Extinction Image Method

Measurement of Thickness of the Thin Film Using Reflectance Spectrum of the White Light

Influence of Coating Spray on Surface Measurement Using 3D Optical Scanning Systems

Full-Field Thickness Measuring of Photoresist on Spherical Surface in Lithography Techniques

Two-spectrum Method for Measuring the Thickness of Photoresist in Lithography Techniques

A Novel High-Frequency Ultrasonic Approach for Evaluation of Homogeneity and Measurement of Sprayed Coating Thickness

Computational Investigation of a Novel Metal Thickness Measurement System with Coaxial Triple-Coil Sensor for Chemical Mechanical Polishing

A measuring system for mechanical characterization of thin films based on a compact in situ micro-tensile tester and SEM moiré method

A New Interferometer for Measuring Ultra-Small Thickness and Spacing

Film thickness measurement by double-wavelength infrared transmittance method