Abstract:An experimental method is introduced for quickly developing a new copper electroplating formula of via and trench filling. The total potential drop Oil) after leveler added into electroplating solution in galvanostatic measurements (GM), charring area of latten in Hull cell electroplating and via filling dimple in Harring cell electroplating were sequentially employed to evaluate and screen the leveler for copper electroplating via and trench filling. Three levelers synthesized by imidazole and different concentration of 1,4-butanediol diglycidyl ether were used to demonstrate the availability of suggested experimental method. The results indicate that the leveler orderly screened by GM, hull cell electroplating and Harring cell electroplating shows an excellent performance of improving via filling. Then, the air agitation and concentration of other components in electroplating solution were further optimized for via and trench filling. In harring cell, in the condition of 1.5 A/dm(2) current density, the via with 100 mu m diameter and 80 mu m depth was filled with dimple < 10 mu m after 45 min, the silicon trench with 25 mu m width and 115 mu m depth was filled after 80 min This experimental method is helpful for researchers to develop a qualified copper electroplating formula for electronic manufacture.

Experimental design method used to study the inlfuential factors of blind via iflling in HDI manufacturing

The effect of the interaction between different additives on blind via filling

Research and optimization of through holes and fine lines with simultaneous electroplating

Effects Of Additives On Filling Blind Vias For Hdi Manufacture

Study on the technology of simultaneous through-hole metallization and blind hole filled copper

Study on plating filling in blind hole by horizontal plating for HDI PCB

The study on improving microvia-filling plating

Use Orthogonal Experimental Method to Regulate PID Parameters

Orthogonal optimization the technique parameters made by the 50μm/50μm fine line

Study on thin surface copper technology in blind via iflling plating

Research on Manufacturing Process of Buried/Blind Via in Hdi Rigid-Flex Board

Optimisation of the Micro and Small Hole EDM Process Based on the Experimental Design

Topological and Parameter Optimization Design on Front Platen of Injection Molding Machine

Optimization Design for Roadheader Cutting Head by Orthogonal Experiment and Finite Element Analysis

Application of Ultraviolet Laser in High Density Interconection Micro Blind Via

Optimization of Injection Molding Process Parameters Based on Orthogonal Experiment

Fabricating research of two-depth micro blind via with copper filled in HDI PCB

Study on the Forming Process Parameters of Sleeper Fixed Reinforcing Plate Using Orthogonal Experiment Method by Numerical Simulation Technology

Optimization of Process Parameters in Lead-Free Wave Soldering Based on Orthogonal Experiment and Analytic Hierarchy Process

OPTIMAL PROCESS DESIGN CONSIDERING INTERACTIONS BETWEEN PROCESS PARAMETERS IN INJECTION MOLDING

Quick Development Of Copper Electroplating Formula For Via And Trench Filling By An Experiential Method