Abstract:The amplitude and phase imbalances of the in-phase (I) and quadrature (Q) branches inherent in the direct conversion receiver structure cause the generation of image frequency interference signals. In this paper, a frequency-domain I/Q imbalance calibration algorithm is proposed for wideband direct conversion receivers. The I/Q imbalance model is rebuilt by applying the infinitesimal method and FFT algorithm. The mathematical expressions for the exact computation of the I/Q imbalance parameters are derived based on the frequency-domain statistical properties of the baseband signal. The two phase parameters, frequency-dependent I/Q imbalance (FD-IQI) and frequency-independent I/Q imbalance (FI-IQI), are separated according to the parity properties of the imbalance parameter. To avoid the interference from the transmitter, the receiver impairment estimation is performed using a frequency offset (FO) DC training signal, and a low-cost real-valued compensation (RVC) filter is introduced to correct the impairments of the received signal. The performances of the proposed calibration model are evaluated through simulations and experiments. The simulation results show that the image rejection ratio (IRR) is improved to 80-120 dBc and can also exceed 40 dBc at high noise levels. The experimental results based on the CX9261A evaluation board show that the average IRR of the multi-tone signal is increased by 24.99 dB, and the IRR of the wideband signal is increased by 19.08 dB.

A Self-Correction Solution to DC Offsets in Zero-IF Receivers

An Effective DC Offset Calibration Method Combined with Analog and Digital Circuits for Direct Conversion Receivers

A Low-Power DC Offset Calibration Method Independent of IF Gain for Zero-if Receiver.

A Blind Calibration Model for I/Q Imbalances of Wideband Zero-IF Receivers

A LUT-free DC Offset Calibration Method for Removing the PGA-gain-correlated Offset Residue.

Eliminating the Impacts of Flicker Noise and DC Offset in Zero-IF Architecture Pulse Compression Radars

A 0.6-V Zero-IF/Low-IF Receiver with Integrated Fractional-N Synthesizer for 2.4-Ghz ISM-Band Applications.

A Frequency-Domain I/Q Imbalance Calibration Algorithm for Wideband Direct Conversion Receivers Using Low-Cost Compensator.

High-Linearity Direct Conversion Receiver with the Transconductance Equalization Technique and DCOC Method

An automatic DC-Offset cancellation method and circuit for RF transceivers

A Sub-GHz CMOS Low-IF Receiver for Lot Applications

Digitally Assisted IIP2 Calibration for CMOS Direct-Conversion Receivers

A Low-Power Low-Noise Direct-Conversion Front-End with Digitally Assisted IIP2 Background Self Calibration

A Three-stage Analog Low-Frequency Drift Calibration and DC Offset Correction Circuit for Ultrasonic AFE

A Dual-Mode Analog Baseband with Digital-Assisted Dc-Offset Calibration for Wcdma/Gsm Receivers

Analog baseband for WCDMA implementation by using digital-controlled DC Offset Cancellation

A Novel Dynamic DC-offset Canceller

Self-tuned SAW-less GNSS receiver front end with blocker filtering and gain-irrelevant DC offset cancellation

Design of quadrature amplitude modulation–based DC offset cancellation circuit

A New DC Cancellation Technique for a Mixer-First Receiver in UHF RFID Reader

An Interference Self-Cancellation Technique for SC-FDMA Systems