Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Design of quadrature amplitude modulation–based DC offset cancellation circuit

An Effective DC Offset Calibration Method Combined with Analog and Digital Circuits for Direct Conversion Receivers

A Sigma-Delta Modulator with Residual Offset Suppression

A Wideband Digital Variable Gain Amplifier with DC Offset Cancellation in SiGe 0.18µm BiCMOS Technology

A DC Offset Cancellation Circuit Using Digital Assistance Technique and Self-Calibrating Comparator for RF Transceiver

Analog baseband for WCDMA implementation by using digital-controlled DC Offset Cancellation

An automatic DC-Offset cancellation method and circuit for RF transceivers

Analysis And Design Of A 400mhz-6ghz Quadrature Demodulator With High Linearity

DFT-based Optical Offset-Qam OFDM: Analytical, Numerical, and Experimental Studies.

Analysis And Design Of A High Linearity Quadrature Demodulator Based On Sige Bicmos Process

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

A Novel Carrier Frequency Offset Tracking Scheme in MQAM-OFDM Systems

Research on High-Order QAM Carrier Recovery Method

A 5.6 Similar To 8.2ghz Qvco With A New Dcca Circuit

A Low Voltage Low Power Highly Linear CMOS Quadrature Mixer Using Transconductance Cancellation Technique

Offset-QAM multicarrier technology for optical systems and networks (Invited)

Design of a 5-GHz WLAN CMOS Quadrature Modulator and Up-converter

Some design aspects on 5GHz CMOS quadrature VCO with fully integrated LC-tank

Block-Wise Preamble Design in OQAM/FBMC Systems with Interference Cancellation

Design of Cmos Quadrature Modulator for Wlan 802.11a Application

Design of Quadrature VCO Based on Standard CMOS Process