64-QAM 60-Ghz CMOS Transceivers for IEEE 802.11Ad/ay
Rui Wu,Ryo Minami,Yuuki Tsukui,Seitaro Kawai,Yuuki Seo,Shinji Sato,Kento Kimura,Satoshi Kondo,Tomohiro Ueno,Nurul Fajri,Shoutarou Maki,Noriaki Nagashima,Yasuaki Takeuchi,Tatsuya Yamaguchi,Ahmed Musa,Korkut Kaan Tokgoz,Teerachot Siriburanon,Bangan Liu,Yun Wang,Jian Pang,Ning Li,Masaya Miyahara,Kenichi Okada,Akira Matsuzawa
DOI: https://doi.org/10.1109/jssc.2017.2740264
IF: 5.4
2017-01-01
IEEE Journal of Solid-State Circuits
Abstract:This paper presents 64-quadrature amplitude modulation (QAM) 60-GHz CMOS transceivers with four-channel bonding capability, which can be categorized into a one-stream transceiver and a two-stream frequency-interleaved (FI) transceiver. The transceivers are both fabricated in a standard 65-nm CMOS technology. For the proposed one-stream transceiver, the TX-to-RX error vector magnitude (EVM) is less than -23.9 dB for 64-QAM wireless communication in all four channels defined in the IEEE 802.11ad/WiGig. The maximum communication distance with the full rate can reach 0.13 m for 64 QAM, 0.8 m for 16 QAM, and 2.6 m for QPSK using 14-dBi horn antennas. A data rate of 28.16 Gb/s is achieved in 16 QAM by four-channel bonding. The transmitter, receiver, and phase-locked loop consume 186, 155, and 64 mW, respectively. The core area of the transceiver is 3.9 mm(2). For the proposed two-stream FI transceiver, four-channel bonding in 64 QAM is realized with a data rate of 42.24 Gb/s and an EVM of less than -23 dB. The front end consumes 544 mW in transmitting mode and 432 mW in receiving mode from a 1.2-V supply. The core area of the transceiver is 7.2 mm(2).