Abstract:Ceramic-polymer dielectric composites show promising potential as embedded capacitors, whereas it is a great challenge to obtain a high dielectric constant (εr) at a low ceramic volume fraction (Vc). This work demonstrates a strategy for overcoming this challange. By employing a high sintering temperature (Ts) and introducing porogen, BaTiO3 ceramics with both great connectivity and high porosity are obtained, and the composites with improved εr at a low Vc are prepared after curing the epoxy monomer, which is infiltrated into the porous ceramic bodies. For the composite with a Ts of 1300 °C and a Vc of 38.1%, the εr is as high as 466.8 at 1 kHz, which is improved by about nine times compared to the 0-3 counterpart with a higher Vc of 60.8%. Furthermore, the composite exhibits low dielectric loss and good frequency and temperature stability of εr, indicating the great potential for practical applications. Finite element simulation shows that the enhanced connectivity of BaTiO3 increases the electric field intensity in high-εr BaTiO3 dramatically and therefore plays a key role in the dielectric response of the composite. This work not only sheds light on the high-εr ceramic-polymer composites but also deepens the understanding on the relationship between their properties and microstructures.

Fabrication and Characterization of Embedded Capacitors in PCB Using Epoxy/BaTiO3/PI Capacitor CCL

Fabrication and Characterization of Embedded Capacitors Based on Novel Nanocomposite As Dielectric Materials

Retracted: Preparation And Dielectric Properties Of Batio3/Epoxy Nanocomposites For Embedded Capacitor Application (Retracted Article. See Vol. 115, Pg. 87, 2015)

EMBEDDED CERAMIC CAPACITORS: THE ROAD TO RELIABILITY

Preparation and Properties of Embedded Thick Film Multilayer Capacitor

Dielectric Property Design Based on BaTi2O5 Nanorods and BaTiO3 Nanoparticles Couple and Its Application in Embedded Capacitor

Preparation and dielectric properties of BaTiO 3 / epoxy nanocomposites for embedded capacitor application

Preparation and Properties of BaTiO_3/PI Composite Film for Embedded Capacitors

Enhanced Thermomechanical and Dielectric Properties of the Epoxy Composites by Incorporating SiO2 and BaTiO3 Fillers

Fabrication of Batio3-Based Dielectrics for Ultrathin-Layer Multilayer Ceramic Capacitor Application by A Modified Coating Approach

Fabrication of epoxy-montmorillonite hybrid composites used for printed circuit boards via in-situ polymerization

Facile Large-Scale Preparation of High-Performance Copper Electrode Materials for BaTiO 3 Ceramic Capacitors

Fabrication and properties of carbon-black based embedded resistor inkjet-printing ink for PCB

Obtaining Greatly Improved Dielectric Constant in BaTiO 3 –Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Simultaneous Enhancement of Dielectric Properties and Temperature Stability in BaTiO3‐based Ceramics Enabling X8R Multilayer Ceramic Capacitor

Fabrication and Characterization of Graphene-Barium Titanate-Graphene layered capacitors by spin coating at low processing temperatures

Effect of Electrode Configurations on the Process-Induced Imprint Behavior of Epitaxial Pb(Zr0.52Ti0.48)O3 Capacitors

High‐energy storage performance in BaTiO3‐based lead‐free multilayer ceramic capacitors

Effects of the Particle Size of BaTiO3 Fillers on Fabrication and Dielectric Properties of BaTiO3/Polymer/Al Films for Capacitor Energy-Storage Application

Surface Grafting of Epoxy Polymer on CB to Improve Its Dispersion to Be the Filler of Resistive Ink for PCB

Electrical Performance Enhancement of 400 V Level Aluminum Solid Electrolytic Capacitors with Interface Modulation Through Intervention of PVA