Abstract:Organic aerogels represent an interesting new class of materials and as the basis for the generation of new carbonaceous materials, both finding application in catalytic and adsorbent technology.(1) These are prepared via the synthesis of an aqueous colloidal gel composed Of Suitable precursors. The gel state is generated by the formation of new chemical (i.e. polymerisation), and physical (i.e. hydrogen bonding) bonds, as ageing proceeds. The colloidal gel has a well-developed micro- and mesoporosity as well as large surface area. By fine-tuning the synthesis conditions, the pore architectures may be controlled. The solvent is subsequently removed to yield the aerogel, via extraction by supercritical fluids. For that CO2 is a rational choice as its critical point can be easily reached, and offers a wide range of temperatures and pressures, facilitating another dimension in material property control. The most commonly used precursors to generate the gel state are formaldehyde and resorcinol or its derivatives(2), but may also be prepared from the aqueous gelation and self-assembly of biomass derived polysaccharides.The transformation of organic aerogels via a controlled non-oxidative pyrolysis step, to produce low-density carbons is of increasing interest as the advantages of these materials become more evident. Carbon aerogels are chemically and mechanically more stable than the organic predecessor, provide excellent conductivity, and can be employed at high temperatures and pH. Control of carbon aerogel textural and surface properties is possible by selection of different organic precursors and careful selection of thermal treatment parameters. Interestingly, polysaccharide xerogels and aerogels may also be transformed into like carbons. which are termed Starbons (R)(3).Because of close relationship between certain organic and carbon aerogels in this chapter attention will be given to both. A detailed introduction to the synthesis and processing, characterisation and application of organic and carbon aerogels will be presented. The physical and chemical characteristics of these materials will be discussed in detail, with particular regard to density, specific surface area and porosity. Applications of aerogels will also be introduced, with a particularly accent on their use as heterogeneous catalyst supports. Future prospects for this exciting class of materials will also be proposed.

Preparation of Carbon Aerogels by Conventional Drying

Preparation and Heat Treatment of Titania Aerogels by Ambient Pressure Drying

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Preparation of Nano-Porous Zirconia Aerogel

Preparation and Microstructure Control of Carbon Aerogels Produced Using M-Cresol Mediated Sol-Gel Polymerization of Phenol and Furfural

Preparation of carbon aerogel electrodes for supercapacitor and their electrochemical characteristics

Synthesis and characterization of phenolic-furfural based carbon aerogels

Carbon fiber reinforced carbon aerogel composites for thermal insulation prepared by soft reinforcement

On Porosity of Carbon Aerogels from Sol-Gel Polymerization of Phenolic Novolak and Furfural

Preparation of carbon aerogel in ambient conditions for electrical double-layer capacitor

Preparation and characterization of phenol-melamine-formaldehyde aerogels

Organic Aerogels As Precursors For The Preparation Of Porous Carbons

Preparation and Characterization of Monolithic Silica Fiber/Al2O3 Aerogel Composites by Non-Supercritical Drying

Preparation and characterization of phenolic-melamine-formaldehyde composite aerogel

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Preparation of ambient-dried multifunctional cellulose aerogel by freeze-linking technique

Synthesis of ZrO2 aerogels by supercritical CO2 fluid drying technology

MICROSTRUCTURE EVOLUTION IN THE PREPARATION OF CARBON AEROGELS BY SMALL ANGLE X-RAY SCATTERING

ZrC/C aerogel with high compressive strength by a carbothermic process

Synthesis and Characterization of MF Aerogels

Characterization of resorcinol-formaldehyde aerogel powder