Abstract:Silica aerogels generally exhibit poor mechanical properties, which seriously restrict their commercial use and makes it necessary to reinforce their structures to obtain materials strong enough to withstand mechanical stresses. The incorporation of polymers into silica aerogels is a promising approach due to the enhancement in mechanical strength afforded and the possibility of imparting the hydrophobicity of the polymers to the resulting aerogels. However, the processes typically employed to prepare polymer-reinforced silica aerogels are complex, arduous and costly, requiring multiple washing and soaking steps for the infiltration of the polymer precursors after gelation and supercritical drying. Additionally, diffusion problems can result in heterogeneity in aerogel monoliths due to the use of various cross-linked polymers and the autoclave-limited dimensions of aerogels. In this study, a facile sol–gel route was developed to fabricate a large (500 cm3) polymer–silica aerogel monolith that was stable under atmospheric conditions and suitable for machining. The synthesis of the polymer–silica aerogels began with a facile one-pot reaction involving resorcinol (R), formaldehyde (F), methyltrimethoxysilane (MTMS), and N-(β-aminoethyl)-γ-aminopropyl-trimethoxysilane (AEAPTES), followed by an ambient-pressure drying process. The resulting aerogels were characterised by nitrogen adsorption–desorption, scanning electron microscopy (SEM), contact angle, and thermal conductivity measurements, and the aerogel mechanical properties were evaluated by a unidirectional compression test. The Young's modulus of compression of the aerogels was observed to increase from 3.95 to 34.88 MPa with an increase in the density of the aerogels from 0.14 to 0.26 g cm−3. Simultaneously, the aerogels were observed to be superhydrophobic, with a contact angle as high as 168°, and exhibited low thermal conductivity (0.038 W m−1 K−1) and good absorption for organic liquids, which are critical characteristics for the practical application of aerogels, especially in energy-saving and oil-/chemical-cleanup practices.

Preparation and characterization of phenolic-melamine-formaldehyde composite aerogel

Preparation and characterization of phenol-melamine-formaldehyde aerogels

Organic solvents-free and ambient-pressure drying melamine formaldehyde resin aerogels with homogeneous structures, outstanding mechanical strength and flame retardancy

Preparation and characterization of cellulose nanofiber/melamine–urea–formaldehyde composite aerogels for thermal insulation applications

Phenolic resin-based carbon aerogel composite reinforced by aluminum silicate ceramic fibers

Preparation and Properties of Flexible Phenolic Silicone Hybrid Aerogels for Thermal Insulation

Monolithic resorcinol–formaldehyde alcogels and their corresponding nitrogen-doped activated carbons

Rapid Preparation at Atmospheric Pressure and Gel Phase Analysis of Thermoplastic Phenolic Aerogels with High Specific Strength and Low Shrinkage

Effects of Crosslinker Concentration on Curing Process and Performances of Needled Fiber Preform Reinforced Phenolic Aerogel Composite Using Process Simulation and Comprehensive Experiments

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure

STUDY ON STRUCTURE CHARACTERISTICS OF RESORCINOLFORMALDEHYDE AND Ni(OH)_2 COMPOSITE AEROGELS

Ambient-pressure drying synthesis of large resorcinol–formaldehyde-reinforced silica aerogels with enhanced mechanical strength and superhydrophobicity

Robust monolithic polymer(resorcinol-formaldehyde) reinforced alumina aerogel composites with mutually interpenetrating networks

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Ultralight carbon fiber felt reinforced monolithic carbon aerogel composites with excellent thermal insulation performance

Preparation and Thermo-Mechanical Properties of Modified Gelatin Reinforced SiO2 Aerogels

Morphology controlled carbon aerogel with enhanced thermal insulation and mechanical properties: a simple route for the regulated synthesis

Structure and performance preparation on alginate-based fibrous aerogel with double network

Monolithic carbon aerogels within foam framework for high-temperature thermal insulation and organics absorption

Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel