Abstract:Carbon aerogels with nanoporous structure are attractive for thermal insulation under extreme conditions, but their practical applications are usually plagued by the inherent brittleness and easy-oxidation characteristic at high temperature. Herein, silica-modified carbon aerogels (SCAs) with extraordinarily high strength are prepared via a facile sol-gel polymerization of phenolic resin and siloxane, followed by ambient pressure drying and carbonization. The resulting SCAs possess medium-high density of ∼0.5 g·cm-3 and mesoporous structure with the mean pore size of 33 nm. During carbonization process, the siloxane could be gradually transformed into the amorphous SiO2 particles and crystalline SiC particles, which are coated on the surface of carbon nanoparticle and consequently improve the oxidation-resistance of carbon aerogels. Due to the density-porosity trade-off, the SCAs have high compressive strength of 10.0 MPa and satisfied thermal conductivities of 0.118 W·m-1·K-1 at 25 °C and 0.263 W·m-1·K-1 at 1000 °C. Furthermore, needled carbon fiber-reinforced SCAs (CF-SCAs) with ultrahigh compressive strength of 210.5 MPa are prepared, which exhibit good thermal conductivities of 0.207 W·m-1·K-1 at 25 °C and 0.407 W·m-1·K-1 at 1000 °C. The ultrahigh mechanical strength, good oxidation-resistance, good thermal insulation as well as the facile preparation make the SACs great promising in high-temperature insulations especially under harsh conditions.

Ultralight carbon fiber felt reinforced monolithic carbon aerogel composites with excellent thermal insulation performance

Carbon fiber reinforced carbon aerogel composites for thermal insulation prepared by soft reinforcement

Carbon-Fiber Felt Reinforced Carbon/Alumina Aerogel Composite Fabricated with High Strength and Low Thermal Conductivity

Carbon Foam-Reinforced Polyimide-Based Carbon Aerogel Composites Prepared via Co-Carbonization as Insulation Material

Monolithic carbon aerogels within foam framework for high-temperature thermal insulation and organics absorption

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Transparent, Ultraflexible, and Superinsulating Nanofibrous Biocomposite Aerogels Via Ambient Pressure Drying

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Carbon Aerogel with High Thermal Conductivity Enabled by Shrinkage Control

Engineering thermal and mechanical properties of flexible fiber-reinforced aerogel composites

Fabrication of Large Aerogel-Like Carbon/Carbon Composites with Excellent Load-Bearing Capacity and Thermal-Insulating Performance at 1800 °C

SiO2 aerogel multiscale reinforced by glass fibers and SiC nanowhiskers for thermal insulation

Carbon Aerogel for Insulation Applications: A Review

Facile preparation of lightweight and robust carbon aerogel monoliths for high-temperature thermal insulation and oil-water separation

A lightweight and high compressive resistance thermal insulation material with dual-network structure

A Scalable Crosslinked Fiberglass-Aerogel Thermal Insulation Composite

Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure

Robust, lightweight gelatin composite aerogel with outstanding thermal insulation

Fabrication and Properties of Polyimide/Carbon Fiber Aerogel and the Derivative Carbon Aerogel

Ultrahigh-strength carbon aerogels for high temperature thermal insulation

Ultra-high strength, highly deformable and superhydrophobic polybenzoxazine@cellulose nanofiber composite aerogel for thermal insulation