Abstract:Even though compressible carbon aerogels are widely studied for oil/organic solvent recovery, it is challenging to simultaneously achieve excellent mechanical performance and recovery efficiency due to the brittleness of the carbon skeleton. Here a novel strategy is proposed to efficiently fabricate a 3D elastic reduced graphene oxide (RGO)-cross-linked carbon aerogel. Notably, cellulose nanocrystals (CNCs) isolated from plant pulp act as an essential component, and prehydrolysis liquor (PHL), an industrial byproduct in the plant pulping process, serves as the adhesion promoter to achieve enhancement of the strength and flexibility of the carbon aerogel. For the first time, all components (pulp and PHL) of the tree were fully exploited to design a carbon aerogel. The formation of wavy carbon layers with springboard elastic supporting microstructure enables mechanical stretch and shrink as well as avoids interfacial collapse during compression. Benefiting from the unique wavy layer structure and strong interaction, the carbon aerogels are ultralight (4.98 mg cm–3) and exhibit supercompression (undergoing extreme strain of 95%) and superelasticity (about 100% height retention after 500 cycles at a strain of 50%). Particularly, the carbon aerogel can selectively and quickly adsorb various oily contaminants, exhibiting high oil/organic solvents absorption capacity (reaches up to 276 g g–1 for carbon tetrachloride) and good recyclability. Finally, practical applications of the carbon aerogel in oil-cleanup and pollution-remediation devices are exhibited. Hence, this versatile and robust functionalized carbon aerogel has promising potential in oil cleanup and pollution remediation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02394?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02394</a>.Experimental section. Photograph of the directional freezing process. Component analysis of xylosugar in PHL. Digital photographs and micromorphology of RGA-6 and RGCA-6. TEM morphologies of RGA, RGCA, and RGCPA1:1. Morphologies of GA, GPA, GCA, GCPA1:1, GCPA1:2, and GCPA1:4. The as-prepared RGCPA had low density. XPS high-resolution C 1s spectra of (a) GA, (b) RGA, (c) GCA, (d) RGCA, (e) GCPA1:2, and (f) RGCPA1:2. Compression performance of RGCPA. Stress remaining in RGA, RGCA, and RGCPA. Nitrogen adsorption–desorption isotherms and pore size distribution of RGCPA1:2. Cassie–Baxter nonwetting behavior of RGCPA. Relation between density of different organic solvents and absorption capacity of RGCPA. Adsorption cycle of RGCA for organic solvent. The composition of different suspensions and the corresponding aerogels. Molecular weight of lignin in PHL. Density and porosity of the as-prepared carbon aerogels. Elemental contents of carbon aerogels from elemental analysis. Mechanical properties of the as-prepared carbon aerogels (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02394/suppl_file/am1c02394_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile preparation of lightweight and robust carbon aerogel monoliths for high-temperature thermal insulation and oil-water separation

Synthesis of Monolithic Carbon Aerogels with High Mechanical Strength Via Ambient Pressure Drying Without Solvent Exchange

Preparation of micro-convex rough interface carbon aerogels with cellulose-lithium bromide (LiBr) molten salt hydrate gelled system and application of oil-water separation

Monolithic carbon aerogels within foam framework for high-temperature thermal insulation and organics absorption

Strong and machinable carbon aerogel monoliths with low thermal conductivity prepared via ambient pressure drying

Synthesis of Structure Controllable Carbon Aerogel with Low Drying Shrinkage and Scalable Size As High-Temperature Thermal Insulator

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying

Synthesis of carbon aerogels with controlled morphology and pore structure to modulate their bulk density and thermal conductivity via a quick one-pot preparation strategy

Synthesis of Environmentally Friendly Nanoporous Monolithic Carbon Aerogels Via Ambient Pressure Drying for High-Temperature Thermal Insulators

Silica-Bacterial Cellulose Composite Aerogel Fibers with Excellent Mechanical Properties from Sodium Silicate Precursor

Robust Silica–Agarose Composite Aerogels with Interpenetrating Network Structure by in Situ Sol–Gel Process

Preparation of a Carbon Fibre-Reinforced Carbon Aerogel and Its Application As a High-Temperature Thermal Insulator.

Facile Preparation of Superior Compressibility and Hydrophobic Graphene@Cellulose Nanocrystals/Epdm Hybrid Aerogels for Enhanced Electromagnetic Interference Shielding and Highly Efficient Oil/Organic Solvent Adsorption

Resilient Silica-Based Aerogels with Organic and Inorganic Molecular Hybrid Structure Prepared by a Novel Self-Catalyzed Gelling Strategy for Efficient Heat Insulation and CO2 Adsorption

Mechanically Flexible Carbon Aerogel with Wavy Layers and Springboard Elastic Supporting Structure for Selective Oil/Organic Solvent Recovery

Lightweight, Flexible and Hydrophobic Cotton Fiber/Silica Aerogel Composite by Freeze-Drying for Organic Solvent/Water Separation and Thermal Insulation

Anisotropic cellulose nanofiber/chitosan aerogel with thermal management and oil absorption properties

Fabrication of Biomass-Derived Carbon Aerogels with High Adsorption of Oils and Organic Solvents: Effect of Hydrothermal and Post-Pyrolysis Processes

Carbon Aerogel Composites Prepared by Ambient Drying and Using Oxidized Polyacrylonitrile Fibers As Reinforcements

Carbon Aerogel from Winter Melon for Highly Efficient and Recyclable Oils and Organic Solvents Absorption

Fabrication of Large Aerogel-Like Carbon/Carbon Composites with Excellent Load-Bearing Capacity and Thermal-Insulating Performance at 1800 °C