Abstract:This work presents the preparation and property characterization of a biomass gelatin (GA)-based aerogel. Halloysite nanotubes (HNTs) were used to improve the mechanical strength, pore size distribution, and thermal stability of the aerogel. Polyethyleneimine (PEI) and (3-glycidyloxypropyl)trimethoxysilane (GPTMS) were utilized to increase the interfacial interaction between HNTs and GA through chemical cross-linking. Green, sustainable, and low-cost composite aerogels were prepared by "cogel" and freeze-drying techniques. The experimental results show that the HNTs/GA composite aerogel has a low density (31.98–57.48 mg/cm3), a high porosity (>95%), a low thermal conductivity (31.85–40.16 mW m–1 K–1), and superior moldability. In addition, the mechanical strength and thermal insulation properties of the HNTs/GA composite aerogels with a "thorn"-like lamellar porous network structure are different in the axial direction versus the radial direction. The maximum compressive strength, maximum compressive modulus, and corresponding specific modulus in the axial direction were 1.81 MPa, 5.45 MPa, and 94.8 kN m kg–1, respectively. Therefore, the biomass/clay composite aerogel will be a sustainable and renewable functional material with high mechanical strength and thermal insulation properties, which is expected to further promote biomass and clay for high value utilization.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c23647.SEM image of the HNTs/GA composite aerogel; FT-IR spectra of PEI, HNTs, GA, GPTMS, and HNTs/GA-1 composite aerogel; XPS survey spectrum of GA and the HNTs/GA aerogel; and TGA and DTG of GPTMS and PEI (PDF)This article has not yet been cited by other publications.

Robust, lightweight gelatin composite aerogel with outstanding thermal insulation

Facile Construction of the Aerogel/geopolymer Composite with Ultra-Low Thermal Conductivity and High Mechanical Performance

Konjac glucomannan-based aerogels with excellent thermal stability and flame retardancy for thermal insulation application

Ultra-high strength, highly deformable and superhydrophobic polybenzoxazine@cellulose nanofiber composite aerogel for thermal insulation

Anisotropic and high-strength SiO2/cellulose nanofiber composite aerogel with thermal superinsulation and superhydrophobicity

High Compression Strength and Thermal Insulation Silica Aerogel Monolith with Scaffold of a Cyclic Olefin Siloxane Co-Oligomer Via Ambient Pressure Drying

Ultrahigh-strength silicone aerogels reinforced by an armor-like epoxy framework via a temperature-controlled sequential reaction strategy

Semi-template based, biomimetic-architectured, and mechanically robust ceramic nanofibrous aerogels for thermal insulation

Reversible sacrificial hydrogen bonds enhanced ultra-high strength polybenzoxazine aerogel for thermal insulation

Highly Deformable High-Strength SiO2 Aerogel Designed with an Alternating Structure of Hard Cores and Flexible Chains for Thermal Insulation

Compressible Polybenzoxazine High-Strength Aerogel with a Linear Structure for Thermal Insulation

Robust Silica–Agarose Composite Aerogels with Interpenetrating Network Structure by in Situ Sol–Gel Process

A Scalable Crosslinked Fiberglass-Aerogel Thermal Insulation Composite

Double cross-linked biomass aerogels with enhanced mechanical strength and flame retardancy for construction thermal insulation

Transparent, robust, and machinable hybrid silica aerogel with a “rigid-flexible” combined structure for thermal insulation, oil/water separation, and self-cleaning

A lightweight and high compressive resistance thermal insulation material with dual-network structure

An All-Ceramic, Anisotropic, and Flexible Aerogel Insulation Material

Robust Silica-Bacterial Cellulose Composite Aerogel Fibers for Thermal Insulation Textile

Cogel Strategy for the Preparation of a “Thorn”-Like Porous Halloysite/Gelatin Composite Aerogel with Excellent Mechanical Properties and Thermal Insulation

"Brick‐Mortar‐Binder" Design toward Highly Elastic, Hydrophobic, and Flame‐Retardant Thermal Insulator

Short jute fiber-reinforced silica aerogel with excellent mechanical properties