Abstract:Aerogel has been used for thermal insulation because of its extremely low thermal conductivity, but the application has been restricted to non-loading-bearing structures by its low strength properties. Fiber-reinforced aerogel was prepared with higher strength but without sacrificing much of its thermal conductivity. While fiber-reinforced aerogel performs as load-bearing insulation, two behaviors must be investigated: compression and stress relaxation at evaluated temperature. At first, compression test was performed on a fiber-reinforced aerogel composite at both room and evaluated temperature, then the effects of temperature on compression properties of the fiber-reinforced aerogel were analyzed. Stress Relaxation Test was carried out at a constant strain of 0.1 for 1200s at both room and evaluated temperature. The experimental results show that the stress relaxations increase with the temperature rise from 200°C to 800°C. Previous research and Scanning Electron Microscope (SEM) analysis of specimens showed that two time-dependent behaviors: (1) cracks induced by collapse of the pores, and (2) fiber failures subject to interfaces that debond and slide, might be possible reasons for the stress relaxation and the small inelastic strain of specimen tested at 25°C. While three time dependent phenomena: (1) fusing of aerogel nanoparticles to form nanoparticle clusters, (2) fiber stress relaxation and (3) fiber failures subject to interfaces that debond and slide, would be possible reasons for the remarkable stress relaxation behavior at 800°C.

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Synthesis and Heat Insulation Performance of Glass Fiber Reinforced SiO2 Aerogel Composites

Mechanical, Thermal and Flammability Properties of Glass Fiber Film/Silica Aerogel Composites

SiC Network Reinforced SiO2 Aerogel with Improved Compressive Strength and Preeminent Microwave Absorption at Elevated Temperatures

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

Mechanical Property of Silica Aerogel Fibers Composite Insulation

Mechanical Performance and Thermal Stability of Glass Fiber Reinforced Silica Aerogel Composites Based on Co-Precursor Method by Freeze Drying

Microstructure and Properties of the Si3N4/silica Aerogel Composites Fabricated by the Sol–gel Method Via Ambient Pressure Drying

Robust Silica–Agarose Composite Aerogels with Interpenetrating Network Structure by in Situ Sol–Gel Process

Preparation and Thermal Stablity of Silica- alumina-fibers Composite Aerogels

Mechanical Reinforced Fiber Needle Felt/silica Aerogel Composite with Its Flammability

Preparation and Properties of Fiber Reinforced SiO_2 Aerogel Insulation Composites

Facilitated Fabrication of High Strength Silica Aerogels Using Cellulose Nanofibrils As Scaffold.

A Novel Silica Aerogel/porous Si3N4 Composite Prepared by Freeze Casting and Sol-Gel Impregnation with High-Performance Thermal Insulation and Wave-Transparent

Microstructure And Thermal Insulation Property Of Silica Composite Aerogel

Facile Synthesis of Silica Aerogel Composites Via Ambient-Pressure Drying Without Surface Modification or Solvent Exchange

Engineering thermal and mechanical properties of flexible fiber-reinforced aerogel composites

Experimental Investigation on Mechanical Properties of A Fiber-Reinforced Silica Aerogel Composite

Progress of Silica Aerogel Insulation Composites

A Novel Strategy for the Construction of Silk Fibroin-Sio2 Composite Aerogel with Enhanced Mechanical Property and Thermal Insulation Performance

Super-insulated, Flexible, and High Resilient Mullite Fiber Reinforced Silica Aerogel Composites by Interfacial Modification with Nanoscale Mullite Whisker