Abstract:Purpose Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO 2 aerogel/PET composites slices and fibers were prepared, and the effects of the SiO 2 aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO 2 aerogel/PET composites slices and their fibers were systematically investigated. Design/methodology/approach The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb 2 O 3 and the corresponding mass of SiO 2 aerogel, and SiO 2 aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO 2 aerogel/PET composite fibers were prepared by melt-spinning method. Findings The results showed that the SiO 2 aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO 2 aerogel, and the thermal conductivity of the 1.0 Wt.% SiO 2 aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO 2 aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO 2 aerogel/PET composite fibers showed an increasing trend with the addition of SiO 2 aerogel. Research limitations/implications The SiO 2 aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today's society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis. Originality/value In this study, SiO 2 aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

A novel combustion drying technology for in-situ preparation of glass fiber composite SiO2 aerogel thin felt with excellent thermal insulation performance

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Synthesis and Heat Insulation Performance of Glass Fiber Reinforced SiO2 Aerogel Composites

Konjac glucomannan-based aerogels with excellent thermal stability and flame retardancy for thermal insulation application

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Mechanical Performance and Thermal Stability of Glass Fiber Reinforced Silica Aerogel Composites Based on Co-Precursor Method by Freeze Drying

Mechanical, Thermal and Flammability Properties of Glass Fiber Film/Silica Aerogel Composites

Thermal Insulation and Moisture Resistance of High‐Performance Silicon Aerogel Composite Foam Ceramic and Foam Glass

Silica-Bacterial Cellulose Composite Aerogel Fibers with Excellent Mechanical Properties from Sodium Silicate Precursor

A Novel Silica Aerogel/porous Si3N4 Composite Prepared by Freeze Casting and Sol-Gel Impregnation with High-Performance Thermal Insulation and Wave-Transparent

Design and preparation of novel Y2O3-SiO2 composite aerogels for high-temperature thermal insulators

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

Rapid preparation of Palygorskite/Al2O3 composite aerogels with superhydrophobicity, high-temperature thermal insulation and improved mechanical properties

Synthesis and characterization of ambient-dried microglass fibers/silica aerogel nanocomposites with low thermal conductivity

Ultralight carbon fiber felt reinforced monolithic carbon aerogel composites with excellent thermal insulation performance

In-situ acid catalysis strategy to achieve rapid ambient pressure drying preparation of aerogels

Rapid Synthesis of Super Insulation Silica Aerogel Composites Strengthened with Mullite Fibers

In-situ synthesis of SiO 2 aerogel/polyethylene terephthalate composite slices and their fibers

Environmental-friendly and Fast Production of Ultra-Strong Phenolic Aerogel Composite with Superior Thermal Insulation and Ablative-Resistance

CHARACTERIZATION OF SiO2 AEROGELS/FIBER COMPOSITES PREPARED BY THE SOL-GEL METHODS

Engineering thermal and mechanical properties of flexible fiber-reinforced aerogel composites