Abstract:The flue gas desulfurization reactor by spray drying adsorption plays a crucial role in the process of gas purification. This study employed the multi-phase particle-in-cell method to accurately model the three-dimensional motion of particles of different sizes in the flue gas desulfurization reactor. The double-film theory was utilized to simulate the heat and mass transfer processes of desulfurization slurry droplets. Additionally, this study conducted a comprehensive analysis of various factors affecting gas-solid flow and mass transfer processes, including flue gas inlet velocity and temperature, Ca/S molar ratio, slurry particle size, and slurry temperature. The results demonstrate that the simulated and experimental results are in good agreement, validating the reliability of the developed model. The axial mass fluxes of gas and particles exhibit contrasting distributions in the central part and near the wall, with the turbulent viscosity being particularly pronounced in the top nozzle region. The inlet velocity of flue gas has a limited effect on the axial mass flux of particles, whereas the Ca/S molar ratio exerts a more significant influence. Furthermore, the Ca/S molar ratio has a substantial impact on the spatial distribution of flue gas temperature. The inlet velocity of flue gas and slurry particle size are negatively and positively correlated with particle residence time, respectively. Based on the mass transfer characteristics, the reactor interior can be divided into three zones: a high-efficiency desulfurization zone, a low-efficiency desulfurization zone, and a partial desulfurization zone. For the investigated operating conditions, the desulfurization efficiency is most strongly influenced by the slurry particle size, followed by the flue gas inlet velocity, Ca/S molar ratio, flue gas inlet temperature, and slurry temperature.

Formation of fine particles in flue gas desulphurization process using limestone-gypsum

Formation and migration of soluble ions in condensable particulate matter in limestone-gypsum wet flue gas desulfurization system

Analysis and Optimization of Chemical Processing Parameters for Wet Flue Gas Desulphurization System

Insights into the Desulfurization Mechanism of Low-Grade Limestone As Absorbent Induced by Particle Size

Application and experimental investigation of compound additive enhanced wet flue gas desulfurization process

STUDY ON DESULFURIZATION CHARACTERISTIC IN CaO ACTIVATION REACTOR OF LIMESTONE INJECTION FGD SYSTEM --EXPERIMENTAL RESULTS AND DISCUSSION

Experimental Study of Wet Flue Gas Desulphurization of Impinge Liquid Column Tower

Experimental Study of Semi-dry Flue Gas Desulfurization in Circulating Suspension Fluidized Bed

Study on the Efficiency of Fine Particle Removal in a Single-Tower Dual-Cycle Desulfurization Process Utilizing Heterogeneous Condensation

Application and Research of High Molecular Carboxylates in Desulphurization System of Thermal Power Plant

Research Progress of FGD Technology by Limestone Injection in Pulverized-Coal Fired Boilers

Mechanism of Dry Fgd Process and Characters of Circulating Particles

Experimental Study on Additive Enhanced Limestone Wet Flue Gas Desulfurization

INTERACTION BETWEEN SO2 FROM FLUE GAS AND SORBENT PARTICLES IN DRY FGD PROCESSES

Desulfurization Characteristic of Calcium-Based Sorbent During Activation Process.

Experimental Study on Removal Effect of Wet Flue Gas Desulfurization System on Fine Particles from a Coal-fired Power Plant

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

Numerical Simulation of Wet Limestone-Gypsum Flue Gas Desulfurization System

Pilot Plant Study of Wet Slurry Jet Flue Gas Desulfurization

Effects of high steam partial pressure on desulfurization process of limestone

Factors influencing desulphurization efficiency of wet flue gas desulphurization system