Abstract:In our previous studies, several papermaking sludge-based flocculants (PSBFs) were synthesized from wood pulp papermaking sludge. The structure-activity relationships of the PSBFs have been investigated in simulated dye wastewater treatment, but their efficiencies in practical printing and dyeing wastewater (PPDW) treatment are unknown. Herein, an PSBF was prepared, and its performance is discussed in comparison to polyaluminium chloride (PAC) and polyacrylamide (PAM) in PPDW treatment. The PSBF was used in three ways: as an independent flocculant, as a PAC aid, or used to treat the effluent of the PAC system. The results indicated that adding PSBF alone produced similar color and chemical oxygen demand (CODCr) removals as the PAC system alone, but PSBF performed better than PAC when the pH of PPDW was higher than 7.0. Adding PSBF as a PAC aid improved the color, CODCr and turbidity removals, but the elimination efficiencies were slightly lower than those of the PAC + PAM system. However, when PSBF was used as a flocculant to treat the effluent of the PAC system (PAC → PSBF), the effluent qualities were enhanced. Compared with the PAC system, the color and CODCr removals of PAC → PSBF system increased by 16.21% and 13.26%, respectively. The excitation and emission matrix fluorescence results indicated that PSBF removed tryptophan-like pollutants more efficiently than PAC. Considering the pH requirements of the subsequent bioreactor treatment in practice, the PAC → PSBF system were also investigated at the PPDW pH level of 7.0. Its maximum removal efficiencies of color, CODCr and turbidity were 90.17%, 32.60% and 82.50%, respectively.

Treatment of Paper-Making Black Liquor by Polysilicate Aluminum Ferricsalt Flocculant

Preparation and Application of Slag Compound Flocculant

Experimental Study on the Treatment of Papermaking Black Liquor by the Complicating of Four Coagulants

Study on the flocculation condition of Poly-Silicate-Aluminum-Ferric (PSiAF) coagulant prepared with coal gangue as raw material

Improvement of alum and PACl coagulation by polyacrylamides (PAMs) for the treatment of pulp and paper mill wastewater

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Excellent coagulation performance of polysilicate aluminum ferric for treating oily wastewater from Daqing gasfield: Responses to polymer properties and coagulation mechanism

Research on PSAFS for Printing and Dyeing Wastewater Treatment

Flocculation behaviors of a novel papermaking sludge-based flocculant in practical printing and dyeing wastewater treatment

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

The Production and Application of Complex Flocculant Polysilicate Aluminium Ferric(PSAF)

Synthesis of PSAFS Using Bayer Red Mud and Its Flocculation Effect Evaluation

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Treatment of Fiberglass Wastewater

Application Research of Depurate Sorts of Water Samples with the Polysilicate Aluminum Ferric Floccule

Study on pre-treatment of avermectin wastewater with PSAF coagulant

Treatment of pulp and paper mill wastewater by polyacrylamide (PAM) in polymer induced flocculation

Direct preparation of polysilicic acid flocculant by using pickling waste liquor of metal plate