Abstract:The crystallization kinetics of the dried SrZrO3 precursor powders were investigated by DSC measurements. The crystallization activation energy of ZrO2 in the SrZrO3 precursor powders is 54.9 kJ/mol. And the Avrami parameter value is 2.16, indicating a two-dimensional, diffusion-controlled nucleation and growth mechanism of ZrO2 nuclei in the SrZrO3 precursor powders. The SrZrO3 thermal barrier coating (TBC) was prepared by solution precursor plasma spray (SPPS) process. The coating deposition characteristics were investigated by designing different spray models (single-scan spray, multiple-scan spray, and raster-scan spray) with optimized spray parameters. The surface and cross-sectional morphology of the SrZrO3 coatings were characterized by scanning electron microscope (SEM). The experimental results showed that the atomization pressure of liquid feedstock has strong influence on the trajectory of the precursor droplets in the plasma jet. The inter-pass boundary (IPB) microstructure in the SrZrO3 coating is mainly attributed to the secondary melting of the powdery deposits formed in the cold region of the plasma jet. The influence of the raster-scan step size of plasma torch on the SrZrO3 coating microstructure depends on the stay time of plasma torch on the substrate; the small raster-scan step size is favorable for the formation of IPB structure in this work.

The Crystallization Mechanism of Reactive Plasma Spraying

Investigation on the Performance of TiN Coatings by Reactive Plasma Spraying Crystallization

The Microstructure of Al2O3/TiO2-NiCrBSi Graded Thermal Barrier Coatings Produced by Flame Spraying

The crystallization behaviours of reactive-plasma-sprayed TiCN coatings with different Ti/graphite powder ratios

Investigation of Preparation and Properties of TiCN Coatings by Reactive Plasma Spraying

Study on microstructure evolution and reaction mechanism of in-flight Ti–Si–C agglomerates during reactive plasma spraying using in situ water quenching

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

D. C. Plasma-Sprayed Coatings of Nanostructured Alumina-Titania-Silica

Preparation and characterization of rare earth modified nanocrystalline Al2O3/13 wt%TiO2 feedstock for plasma spraying.

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

On controlling microstructure of suspension plasma sprayed yttria-stabilized zirconia topcoat on β-(Ni,Pt)Al bondcoat

Plasma sprayed TiC–Ti5Si3–Ti3SiC2 composite coatings from Ti–SiC-graphite powders with different SiC particle size

Preparation and properties of supersonic atmospheric plasma sprayed TiB2−SiC coating

Microstructure evolution and mechanical properties of reactive plasma sprayed Ti3SiC2–Ti5Si3–TiC composite coatings

Photocatalytic performance and microstructure of thermal-sprayed nanostructured TiO2 coatings

Oxidation Behavior of Titanium Carbonitride Coating Deposited by Atmospheric Plasma Spray Synthesis

Influence of Plasma Spraying Parameter on Microstructure and Photocatalytic Properties of Nanostructured TiO2–Fe3O4 Coating

Influence of nitridation on the microstructure and corrosion behavior of reactive plasma sprayed TiCN coatings

Deposition Characteristics of SrZrO3 Thermal Barrier Coating Prepared by Solution Precursor Plasma Spray Process

Preparation and properties of reactive plasma sprayed TiC–Ti5Si3–Ti3SiC2/Al coatings from Ti–Si–C–Al mixed powders

Influence of Plasma Arc Current and Gas Flow on the Structural and Tribological Properties of TiN Coatings Obtained by Plasma Spraying