Abstract:This paper investigated the microstructure and tribological behavior of Ni60 alloy coating prepared on the surface of aluminum alloy (ZL109) by plasma spray. The ANSYS software was applied to compare the deformation and temperature of nickel-based alloy coating deposited on aluminum alloy piston with the thickness of 300 μm, 400 μm and 500 μm. X-ry diffraction (XRD) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS) were used to characterize the phase, microstructure and chemical composition of Ni60 alloy coating. Besides, fractal theory was used to study the geometric morphology of materials. The tribological properties of the coating were investigated under oil-lubrication at 100 °C through the circular cyclic test with Si3N4. The result shows that the piston skirt deformation was the smallest when the coating thickness was 300 μm. Multiple phases such as chromium carbide and Ni3Fe phases were contained in the coating, and Si element was dispersed in the Ni60 alloy powders with the form of silicon oxide, which enhanced the hardness and oxidation resistance of the coating. The porosity of the coatings prepared under three power conditions (P = 40 kW, P = 50 kW and P = 45 kW) were 1.58%, 1.47% and 0.97%, respectively. When the load increased from 80 N to 100 N, the depth and width of the wear scar increased and the wear volume added from 1.54 × 108 μm3 to 3.45 × 108 μm3. The friction coefficient of the coating increased with the increment of load. By comparison, the coating with moderate spraying power has less weight loss and better wear resistance under higher wear load.

On controlling microstructure of suspension plasma sprayed yttria-stabilized zirconia topcoat on β-(Ni,Pt)Al bondcoat

The Microstructure of Al2O3/TiO2-NiCrBSi Graded Thermal Barrier Coatings Produced by Flame Spraying

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

Microstructures of Yttria-Stabilized Zirconia Coatings by Plasma Spray-Physical Vapor Deposition

Effect of suspension plasma spraying power on the microstructure and properties of Cr 2 AlC coatings

Plasma Spraying of Functionally Graded Yttria Stabilized Zirconia/NiCoCrAlY Coating System Using Composite Powders

Highly Segmented Thermal Barrier Coatings Deposited by Suspension Plasma Spray: Effects of Spray Process on Microstructure

Microstructure and properties of Al2O3–ZrO2–TiO2 composite coatings prepared by plasma spraying

D. C. Plasma-Sprayed Coatings of Nanostructured Alumina-Titania-Silica

Deposition Characteristics, Sintering and Cmas Corrosion Resistance, and Mechanical Properties of Thermal Barrier Coatings by Atmospheric Plasma Spraying

Structural evolution and enhanced thermal cycling life of HVAF-sprayed NiCrAlY bond coat modified by YSZ

Effect of spraying power on the morphology of YSZ splat and micro-structure of thermal barrier coating

Microstructure, formation mechanism and properties of plasma-sprayed Cr7C3—CrSi2—Al2O3 coatings

Microstructure and thermal behaviour of plasma sprayed zirconia/alumina composite coating

Optimization on the bonding strength and microstructure of atmospheric plasma sprayed Y2O3 coatings by response surface methodology

Study on Fabrication of Zirconia Nanopowder Plasma-Sprayed Coating

Microstructure and tribological behavior of plasma spray Ni60 alloy coating deposited on ZL109 aluminum alloy substrate

The Crystallization Mechanism of Reactive Plasma Spraying

Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings

Relationship between microstructure and bonding strength of yttria-stabilized zirconia thermal barrier coatings

Mechanism of vertical crack formation in Yb2SiO5 coatings deposited via plasma spray-physical vapor deposition