Abstract:Traditional TiN coatings cannot meet the requirements in many applications under extreme conditions because of their relatively low hardness (similar to2000Hv), high friction coefficient (>0.4), inade- quate thermal stability and insufficient corrosion. (Ti,Al)N coatings are a promising alternative to TiN coatings, which have recently been obtained by some groups. However, The deposition of coatings on ceramic substrates prepared by traditional physical vapor deposition was puzzled by low adhesions. In this work, (Ti,Al)N deposition was realized by a new technique namely pulsed high energy density plasma. The ratio of Ti and Al atoms was kept constant at 1:1, since this was known to be the best ratio for (Ti,Al)N synthesis. However, the process allows many other deposition parameters to be varied. In this study, the influences of the discharge voltage between the inner and outer electrode, the distance between the sample and the pulsed plasma gun, and the shot number of the pulsed plasma on coating formation and properties were investigated. Under the optimum deposition conditions, the adhesive strength of (Ti,Al)N coating to Si3N4 ceramic substrate was satisfactory with the critical load up to more than 80 mN. In addition, the coatings were investigated with respect to mechanical and wear behavior, including nanohardness, Young's modulus and cutting performances. The (Ti,Al)N coatings possess resulted very high values of nanohardness and Young's modulus, which are near to 40 GPa and 680 GPa, respectively. Because of the deposition of (Ti,Al)N coatings the wear resistance and edge life of the coated tools were improved dramatically evaluated by the cutting perforinances of the coated tools in turning HT250 (HB230) steel under industrial conditions. These improvements were attributed to a combination of four effects of deposition, ion implantation, quench and solid solution strengthening in terms of the structural analyses.

Oxidation Behavior of Titanium Carbonitride Coating Deposited by Atmospheric Plasma Spray Synthesis

High-temperature oxidation behavior of plasma-sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ coatings on titanium alloy

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

Investigation of Preparation and Properties of TiCN Coatings by Reactive Plasma Spraying

Oxidation and Heat Shock Resistance of Plasma-Sprayed TiC-CoNi Composite Coatings at 900 °C

Influence of nitridation on the microstructure and corrosion behavior of reactive plasma sprayed TiCN coatings

Deposition Mechanisms and Oxidation Behaviors of Ti-Ni Coatings Deposited in Low-Temperature HVOF Spraying Process

High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying

High Temperature Wear Behavior of Titanium Nitride Coating Deposited Using High Power Impulse Magnetron Sputtering

Reactive nitrogen plasma spray coating of titanium nitride: plasma torch design and coating analysis

The crystallization behaviours of reactive-plasma-sprayed TiCN coatings with different Ti/graphite powder ratios

The oxidation behaviors of TiB1.73, Al0.59Ti0.41N, and TiB1.73/Al0.59Ti0.41N coatings deposited by high-power impulse magnetron sputtering method

Microstructure and Mechanical Properties of Titanium Nitride Coatings for Cemented Carbide Cutting Tools by Pulsed High Energy Density Plasma

Characterization of Superhard Ternary (ti,al)n Coatings Prepared by Pulsed High Energy Density Plasma

Effect of heat treatment on the microstructure and corrosion behaviors of reactive plasma sprayed TiCN coatings

Properties of TiAlCrN coatings prepared by vacuum cathodic arc ion plating

High Temperature Oxidation Behaviors of Al/Cr Composite Coating on Ti2AlNb Alloy

High-temperature tribological behavior of thermally-treated supersonic plasma sprayed Cr3C2-NiCr coatings

Influence of temperature on the phase structure, surface morphology, mechanical and tribological properties of Ti–N coatings prepared by MPCVD

Plasma Spray Deposition Enhancement of Titanium Nitride Layer Using Nitrogen-Contained Plasma Irradiation of Titanium Substrate as a Pre-spraying Method

Investigation on the Performance of TiN Coatings by Reactive Plasma Spraying Crystallization