Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Study of Particle Size Distribution in Polypropylene Loop Reactor

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Integration of CFD and Polymerization for an Industrial Scale Cis-Polybutadiene Reactor

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

CFD Modeling of Styrene Polymerization in a CSTR

Physical Properties Computation of Pure Components for Ethylene Slurry Polymerization System

Simulation on relative molecular mass distribution of LDPE tubular reactor

Structure effect of industrial loop reactors on non-uniform flow characteristics

Customization of Particle Size Distribution in Continuous Polymerization Process

Hydrodynamic Instability Analysis of the Axial Flow Pump in an Ethylene Polymerization Loop Reactor

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Minimum fluidization velocity of bimodal polyethylene particles

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Thermal stability analysis of ethylene polymerization fluidized bed reactors under condensed mode operation through a TPM-PBM integrated model

Kinetics Of Propylene Bulk Polymerization With A Spherical Ziegler-Natta Catalyst

Modeling and simulation of polypropylene particle size distribution in industrial horizontal stirred bed reactors

Experimental Investigation on Mechanisms of Fine Particles Generation for the Borealis Borstar Multistage Olefin Polymerization Process

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Simulation And Optimization Of The Molecular Weight Distribution In A Non-Ideal Polymerization Reactor