Abstract:Due to the uneven seabed and heaving of soil during pumping, incomplete soil plugs may occur during the installation of bucket foundations, and the impacts on the bearing capacities of bucket foundations need to be evaluated. In this paper, the contact ratio (the ratio of the top diameter of the soil plug to the diameter of the bucket) and the soil plug ratio (the ratio of the soil heave height to the skirt height) are defined to describe the shape and size of the incomplete soil plug. Then, finite element models are established to investigate the bearing capacities of bucket foundations with incomplete soil plugs and the influences of the contact ratios, and the soil plug ratios on the bearing capacities are analyzed. The results show that the vertical bearing capacity of bucket foundations in homogeneous soil continuously improves with the increase of the contact ratio. However, in normally consolidated soil, the vertical bearing capacity barely changes when the contact ratio is smaller than 0.75, while the bearing capacity suddenly increases when the contact ratio increases to 1 due to the change of failure mode. The contact ratio hardly affects the horizontal bearing capacity of bucket foundations. Moreover, the moment bearing capacity improves with the increase of the contact ratio for small aspect ratios, but hardly varies with increasing contact ratio for aspect ratios larger than 0.5. Consequently, the reduction coefficient method is proposed based on this analysis to calculate the bearing capacities of bucket foundations considering the influence of incomplete soil plugs. The comparison results show that the proposed reduction coefficient method can be used to evaluate the influences of incomplete soil plug on the bearing capacities of bucket foundations.

Study on the Horizontal Bearing Capacity of Bucket Foundations

THE CHARACTERISTICS OF THE BEARING CAPACITY OF BUCKET FOUNDATION

A Review on the Computational Theory of Uplift Capacity of Suction Bucket Foundations as Anchors

An Investigation into the Lateral Loading Response of Shallow Bucket Foundations for Offshore Wind Turbines Through Centrifuge Modeling in Sand

On Load-Bearing and Soil-Reacting Characteristics of Hybrid Pile-Bucket Foundations Subjected to Static Horizontal Loading

The Horizontal Bearing Characteristics and Microscopic Soil Deformation Mechanism of Pile-Bucket Composite Foundation in Sand

Model Tests and Numerical Simulation on Bearing Capacity of Bucket Foundations in Soft Clay under Vertical Static and Cyclic Loads

Three dimensional limit analysis of suction bucket foundations

Model Test Study of Bucket Foundation on Soft Clay Strata

Model Tests on Horizontal Load-Bearing and Deformation Resistance Capacities of Pile-Bucket Foundation in Soft Seabed Soil

Exploring the bearing characteristics of suction bucket foundations in Offshore wind turbines: A comprehensive analysis of tensile and compressive behavior

EXPERIMENTAL STUDY ON BUCKET FOUNDATIONS’ RESPONSES IN CALCAREOUS SAND UNDER DYNAMIC LOAD

Influence of Incomplete Soil Plugs on Bearing Capacities of Bucket Foundations in Clay

Horizontal Bearing Performance of the Four-Bucket Jacket Foundation

Upper Bound Solution of the Resisting Moment Bearing Capacity of A Composite Bucket Shallow Foundation of An Offshore Wind Turbine in Sand

Physical modelling of suction foundations of TLPs under horizontal loads

Numerical study on undrained multi-directional bearing capacity of hybrid subsea foundation

Stability Of Bucket Foundations Under Non-Coplanar Combined Loading

Suction Contribution to Uplift Capacity of Suction Buckets under Serviceability Conditions

Numerical Analysis of the Ultimate Bearing Capacity Behavior of Spar Platform's Suction Foundation

Undrained Capacity of a Bucket Foundation with a Limited-Tension Interface for Offshore Wind Turbines