Abstract:Jacket foundations for offshore wind turbines, typically having three or four latticework legs, are mainly subjected to lateral loads induced by winds, waves and currents during their service life. An accurate assessment of the bearing capacity of these foundations is of great importance in the design. This paper presents a study into the monotonic lateral loading behavior of tetrapod piled jacket foundations in undrained clay, with the complex lateral loads being simplified to an equivalent lateral load acting at a certain height of the jacket. A centrifuge testing programme was undertaken to provide high-quality validation data for the development of a three-dimensional finite element model established using ABAQUS. The key parameters investigated are the spacing and embedment of the piles, the height to which the equivalent lateral load acts and the angle between the direction of this load and the orthogonal line of the jacket in the horizontal plane. The parametric study aims to provide guidance to the optimal design of jacket piled foundations: for instance, to examine the critical pile embedment beyond which limited improvement of the bearing capacity of the foundation can be achieved and to define the most unfavorable lateral loading direction. In addition, the limitations of the commonly assumed constant p-multiplier, regardless of the lateral deflection of the pile and the depth along it, are critically discussed. Then an improved analytical model is proposed, based on the existing model used in design and the parametric study results, to quantify the variation of p-multiplier with depth and with pile deflection.

Numerical Analysis of the Ultimate Bearing Capacity Behavior of Spar Platform's Suction Foundation

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Model Tests on Penetration and Pullout of Suction Caissons in Silt

Analysis and Design of Bearing Capacity of Suction Caisson Foundations of Offshore Wind Turbines

Three dimensional limit analysis of suction bucket foundations

Undrained Bearing Capacity of Spudcan under Combined Loading

Bearing capacity and deflection behaviors of large diameter monopile foundations in sand seabed

Numerical analysis of the effect of multidirectional load on the bearing capacity of suction bucket foundation

Numerical Simulation of Offshore Suction Bucket Foundation Pullout Characteristics under Undrained Conditions

Numerical study on undrained multi-directional bearing capacity of hybrid subsea foundation

Sensitivity Analysis of Factors Affecting the Bearing Capacity of Suction Bucket Foundation in Soft Clay

Nonlinear Spring Model for Dynamic Uplift Behaviour of Suction Caisson under Impact Loading

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

Undrained Bearing Capacity of Suction Caissons for Offshore Wind Turbine Foundations by Numerical Limit Analysis

Numerical Simulation Analysis on Bearing Capacity Characteristics of Prestressed Anchor

Failure Mechanism of Suction Foundation of Offshore Platform Based on Centrifuge Modeling and Limit Analysis

Numerical Investigation of the Undrained Compression and Pull-Out Capacity of Suction Foundations in Clay

Design Analysis for Foundation under Spudcan of Jack-up Platform

Numerical Modeling of Composite Load-Induced Seabed Response around a Suction Anchor

Numerical Study on the Suction Force of Jack-Up Mat Foundation on Marine Clay Seabed