Abstract:This study examines the influence of cyclic wave loads on the bearing capacity envelope of mat foundations for bottom-supported platforms in saturated soft clay seabed. These platforms offer advantages in terms of quick installation and removal but may experience reduced bearing capacity due to cyclic wave loads. An evaluation method for the failure envelope of mat foundation using Kriging-based response surface methodology under wave action is proposed. To achieve this, we incorporated an elastoplastic constitutive model for cyclic loading into the ABAQUS finite element method platform, utilizing a self-compiled user-defined material (UMAT) code to describe clay behavior. The evolution of uniaxial bearing capacity and vertical-horizontal-moment (VHM) bearing capacity failure envelope are investigated. The performances of Kriging-based response surface methodology and original response surface methodology are compared, and the evaluation of the VHM failure envelope using the Kriging-based response surface methodology is presented. Results indicate that cyclic wave loads can cause significant weakening of the initial bearing capacity failure envelopes of mat foundations. However, it is worth noting that cyclic wave loads only affect the magnitude of the envelope surface and not its shape. Furthermore, the bearing capacity failure envelope of mat foundations decreases with increasing cyclic stress ratio, frequency, and time factor of cyclic wave loads. The evaluation method for the failure envelope of mat foundation bearing capacity based on Kriging-based response surface methodology under the action of wave loads outperforms the original response surface methodology and can serve as a valuable reference for engineering design.

Numerical study on undrained multi-directional bearing capacity of hybrid subsea foundation

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Numerical modelling on effect of loading rate on uplift behavior of suction caissons

Numerical Study of the Bearing Capacity of the Hybrid Skirted Foundations in Silty Sand under Combined Loading

Analysis and Design of Bearing Capacity of Suction Caisson Foundations of Offshore Wind Turbines

Numerical analysis of the effect of multidirectional load on the bearing capacity of suction bucket foundation

Centrifuge Tests and Numerical Simulations on Vertical Bearing Capacity of Mat Foundation on Marine Clay Seabed

Bearing Performance of Finned Suction Caissons under Combined VHMT Loading in Clay

Bearing capacity and deflection behaviors of large diameter monopile foundations in sand seabed

On Load-Bearing and Soil-Reacting Characteristics of Hybrid Pile-Bucket Foundations Subjected to Static Horizontal Loading

Undrained Bearing Capacity of Spudcan under Combined Loading

Probabilistic undrained bearing capacity of shallow foundations under combined loading in three-dimensional spatially variable soils

The Bearing Capacity of Spudcan Foundations under Combined Loading in Spatially Variable Soils

Sensitivity Analysis of Factors Affecting the Bearing Capacity of Suction Bucket Foundation in Soft Clay

Numerical Analysis of the Ultimate Bearing Capacity Behavior of Spar Platform's Suction Foundation

Evaluation of Bearing Capacity Envelope of Mat Foundations in Soft Clay Seabed under Wave Loads Using Kriging-Based Response Surface Method

Vertical elastic dynamic impedance of a large diameter and thin-walled cylindrical shell type foundation

Combined VHM Bearing Capacity of Pile Leg-Mat Foundation on Marine Clay Seabed

Failure mechanism and lateral bearing capacity of monopile-friction wheel hybrid foundations in soft-over-stiff soil deposit

Vertical Bearing Capacity of Foundations with Large Embedment Depth in Normally Consolidated Clay

Failure mechanism and combined bearing capacity of monopile–friction wheel hybrid foundation in sand-over-clay deposit