Abstract:Large-diameter monopiles are the predominant foundation solution for supporting offshore wind turbines. They are conventionally designed using soil reaction curves developed for long slender piles used for supporting offshore oil and gas platforms (e.g., the API p-y model). However, due to the difference in the length/diameter ratio and the resulting soil mechanisms, the use of p-y curves alone can lead to significant under-prediction of the lateral stiffness and capacity of monopiles. To overcome the shortcoming, the authors have previously proposed a conceptual two-spring framework, i.e., the so-called 'p-y + M-R-theta(R)' model, to capture the monopile response in soft clay under lateral loading. The framework uses distributed p-y springs to consider the lateral soil resistance along the pile above the rotation point (RP) and a single moment-rotation (M-R-theta(R)) spring attached at the RP to capture the entire soil resistance below the RP, i.e., the distributed resistance along the pile, base shear and base moment at the pile tip. The proposed p-y and M-R-theta(R) springs were curve-fitted to the results of 3D numerical analyses. However, as the stress-strain response and the shear strength profile inevitably influence the p-y and M-R-theta(R) springs, the applicability of the empirical formulations to soil conditions other than those examined is uncertain. This study proposes an enhancement to the 'p-y + M-R-theta(R)' framework, in which the p-y and M-R-theta(R) springs are not tied to a specific soil and strength profile but fundamentally linked to the properties that can be measured directly in the site investigation and laboratory. This extension is achieved through analytical analyses and an extensive parametric numerical study. The predictive capabilities of the model are demonstrated by back-analyses of finite element analyses and centrifuge model tests. The proposed model provides practising engineers with a simple yet powerful approach to use site-specific soil reaction curves in the design of monopiles embedded in soft clay.

Failure mechanism and lateral bearing capacity of monopile-friction wheel hybrid foundations in soft-over-stiff soil deposit

Lateral Bearing Performance of a Defective Pile-Supported Wharf with Batter Piles

Failure mechanism and combined bearing capacity of monopile–friction wheel hybrid foundation in sand-over-clay deposit

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Lateral Cyclic Pile–soil Interaction Studies on a Rigid Model Monopile

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

DETERMINATION ON CRITICAL DEPTH OF MONOPILE IN SAND UNDER CYCLIC HORIZONTAL LOAD

On Load-Bearing and Soil-Reacting Characteristics of Hybrid Pile-Bucket Foundations Subjected to Static Horizontal Loading

Bearing capacity and deflection behaviors of large diameter monopile foundations in sand seabed

Failure mechanism of single pile-friction footing hybrid foundation under combined V–H–M loadings by PIV experiments and FE method

A Unified Lateral Soil Reaction Model for Monopiles in Soft Clay Considering Various Length-to-diameter (L/D) Ratios

Centrifuge modelling of monotonic and cyclic lateral responses of a hybrid monopile-bucket foundation for offshore wind turbines

Lateral response and installation recommendation of hybrid monopile foundation for offshore wind turbines under combined loadings

A simplified approach to the monopile-friction wheel dynamic interaction in composite foundation

Site-specific soil reaction model for monopiles in soft clay based on laboratory element stress-strain curves

Dynamic model test on monopile for offshore wind turbine under jointed lateral environmental load and seismic load

Parametric study of hybrid monopile foundation for offshore wind turbines in cohesionless soil

Lateral Deformation Prediction Model of Pile Foundation in Liquefiable Site

Numerical Simulation of Offshore Monopiles with Reinforcement in Shallow Soil Layer

Experimental and numerical studies on lateral bearing characteristics of innovative gravel-filled canister-monopile (GCM) hybrid foundation