Model Tests and Numerical Simulation on Bearing Capacity of Bucket Foundations in Soft Clay under Vertical Static and Cyclic Loads

Jianhua Wang,Haiming Yang
2007-01-01
Abstract:The soft clay stratum was prepared using the vacuum preload method in a large-scale model test tank. Model tests of bucket foundations in the soft clay were conducted to study the bearing capacity under vertical static and cyclic loads. The effect of vertical static loads on the cyclic bearing capacity of single bucket foundations was analyzed. Test results showed following facts. The vertical cyclic accumulative displacement of foundations approaches to shakedown if the vertical total load ratio (the vertical total load to the undrained bearing capacity) is less than 0.85. The displacement gradually increases with an increase in the number of load cycles if the ratio is larger than 0.9. The displacement develops rapidly if the ratio approximates 1.0 or is greater than 1.0. The larger the vertical static load is, the more rapidly the cyclic accumulative displacement develops if the ratio approximates 1.0. Model test results were numerically simulated using elastoplastic finite element method based on the cyclic strength relationship. Calculated results are less than model test results, but the difference among them is less than 20%, which shows that the cyclic bearing capacity calculated based on the cyclic strength relationship is reasonable and safe.
What problem does this paper attempt to address?