Abstract:Abstract To fill the research gaps in the study of flow boiling on composite surfaces, four heat exchange tubes with different structures were investigated: an enhanced tube with herringbone teeth (EHT_HB), a tube with a dimple structure (EHT_DIM), a tube with a composite herringbone tooth/dimple structure (EHT_HB/DIM), and a smooth tube as a baseline for comparison purposes. The experimental conditions were set as follows: saturation temperature 6°C, mass flux 50-205 kg/(m2.s), and vapor quality 0.2-0.8. After confirming the validity of the experimental results, the effects of the mass flux on the flow boiling heat transfer and pressure drop characteristics were examined. Results showed that the flow boiling heat transfer coefficient and pressure drop increase with the increase of the mass flux and the vapor quality in the tested tubes. The EHT_HB/DIM tube was found to combine the advantages of the two structures and to have the highest heat transfer coefficient. The average value of the heat transfer coefficient was found to be 43.75% higher than that of the smooth tube. Also, the average flow boiling heat transfer coefficients of the EHT_HB and the EHT_DIM tubes were found to be 15% and 35% higher that of the smooth tube, respectively. From the perspective of the frictional pressure drop, it was found that the EHT_HB/DIM tube exhibited the maximum frictional pressure drop. The optimum working conditions of the enhanced tubes were determined by introducing a performance factor that captures the combined effects of heat transfer and pressure drop.

Enhanced Heat Transfer Technology for Caldron-shell Oil-fired and Gas-fired Boilers

The Study of Unified Thermal Calculation Model of Circulating Fluidized Bed Boiler Based on Experience

Progress of Passive Enhanced Heat Transfer Tubes

Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials

Theoretical and Experimental Study on Heat Transfer Characteristics of Water Heat Pipe

Application of Multi-Tangential Firing Technology to Settling the High Temperature Corrosion of Water Wall Tube of Boiler

Analysis of the mechanism of enhanced heat transfer by nanofluids

Advances in Reseach on Intensified Heat Transfer Techniques of Tube Pass for Shell-and-Tube Heat Exchanger

Study on Thermal Calculation Method of Circulating Fluidized Bed Boilers

Numerical Investigation On The Heat Transfer Enhancement Behavior Outside Longitudinal Finned Tubes

Visualization Study on the Enhancement of Heat Transfer for the Groove Flat-Plate Heat Pipe with Nanoflower Coated CuO Layer

Investigation of the Heat Transfer Performance of Multi-Borehole Double-Pipe Heat Exchangers in Medium-Shallow Strata

FLOW BOILING HEAT TRANSFER IN ENHANCED TUBES WITH COMPOSITE STRUCTURE

Calculation & Enhancement of Boiling Heat Transfer Outside Horizontal Tube Bundle

Entropy generation and thermodynamic analysis of pool boiling heat transfer on doubly enhanced tubes

Increasing the thermal efficiency of water heating boilers by improving design parameters

Tubes with Heat Transfer Property Intensified by Multi-longitudinal Vortices According to the Field Coordination Theory

RESEARCH ON FLOW AND HEAT TRANSFER CHARACTERISTIC OF TUBE ARRAY HEAT EXCHANGER IN PARTICLE LADEN CROSS FLOW OF BOILER

Investigation on the Heat Transfer Model of the External Heat Exchanger of Circulating Fluidized Bed Boilers

Enhancing thermal performance: a sophisticated analysis of CuO-water nanofluids and twisted tape inserts in tubular heat exchangers-a numerical study

Numerical investigation of the enhanced heat transfer characteristics in dimpled enhanced tube to shell-and-tube lube oil heat exchangers