Abstract:Thermal hydraulic performance of the fin-and-tube heat exchanger is presented in this paper. The purpose of this investigation was to investigate the heat transfer mechanism and flow characteristics in the finned tube heat exchanger with streamline tube. The streamline tube in this paper had the streamline cross section which was composed of a semicircle and a half diamond. Three-dimensional numerical simulation was presented and validated by the experiment and the other numerical simulation from public articles. The present simulation had good agreement with the experimental results. The difference of the j factor and f factor between the experimental results and present simulation results by k-ε-enhance model was less than 7.6%. The geometrical parameters were considered as every single variable to investigate the thermal hydraulic performance. The results showed that smaller transversal and larger tube pitch provided greater compactness and better thermal performance. Moreover, a larger angle was not only beneficial to enhance the thermal performance, but also helpful to improve the overall performance. Secondly, the effects of angle on the heat transfer performance and fluid flow characteristics were investigated as the perimeter kept constant. It was shown that the overall performance of the streamline tube was better than the circular tube. Lastly, the entropy generation including frictional entropy generation and the thermal entropy generation were analyzed. It can be concluded that by using the streamline tube, the wake region can be obviously reduced, and thermal performance can be improved.

Entropy generation and thermodynamic analysis of pool boiling heat transfer on doubly enhanced tubes

Enhancement of Pool Boiling Heat Transfer on Porous Surface Tube

Heat transfer enhancement of helical tubes during pool boiling

Entropy generation analysis and structure optimization of rectangular finned elliptical tube heat exchangers

Research on the Thermal Hydraulic Performance and Entropy Generation Characteristics of Finned Tube Heat Exchanger with Streamline Tube

Experimental study on the pool boiling heat transfer of R134a outside various enhanced tubes

Pool boiling heat transfer of ammonia outside enhanced tubes with various fin structures

Forced Convection Heat Transfer Outside Enhanced Tubes with Different Surface Structures

Boiling Heat Transfer of R22 Outside Single Horizontal Doubly-Enhanced Tubes

Pool Boiling Heat Transfer of Water in a Horizontal Tube Bundle

FLOW BOILING HEAT TRANSFER IN ENHANCED TUBES WITH COMPOSITE STRUCTURE

Comparison of flow boiling heat transfer characteristics inside different enhanced heat transfer tubes

Enhanced pool boiling of propane on horizontal U-shaped tubes in a large-scale confined space

Numerical Investigation On The Heat Transfer Enhancement Behavior Outside Longitudinal Finned Tubes

Analytical and Numerical Study on the Uniformity of Temperature Difference Field in Heat Exchangers

Numerical investigation on enhanced heat transfer in shell-and-tube phase change heat exchanger

Flow Boiling in Inner Annulus of Horizontal Enhanced Tubes

Effectiveness of Entransy Dissipation Metric and Entropy Generation Units in the Design of Fin-Tube Heat Exchangers

Heat Transfer Augmentation and Entropy Generation Analysis of a Helically Coiled Tube with Internal Longitudinal Fins

Tubes with Heat Transfer Property Intensified by Multi-longitudinal Vortices According to the Field Coordination Theory

Investigation on Heat Transfer of In-Tube Supercritical Water Cooling Accompanying Out-Tube Pool Boiling