Abstract:As computational fluid dynamics (CFD) advances, entropy generation minimization based on CFD becomes attractive for optimizing complex heat-transfer systems. This optimization depends on the accuracy of CFD results, such that accurate turbulence models, such as elliptic relaxation or elliptic blending turbulence models, become important. The performance of a previously developed elliptic blending turbulence model (the SST k-ω-φ-α model) to predict the rate of entropy generation in the fully developed turbulent circular tube flow with constant heat flux was studied to provide some guidelines for using this class of turbulence model to calculate entropy generation in complex systems. The flow and temperature fields were simulated by using a CFD package, and then the rate of entropy generation was calculated in post-processing. The analytical correlations and results of two popular turbulence models (the realizable k-ε and the shear stress transport (SST) k-ω models) were used as references to demonstrate the accuracy of the SST k-ω-φ-α model. The findings indicate that the turbulent Prandtl number (Prt) influences the entropy generation rate due to heat-transfer irreversibility. Prt = 0.85 produces the best results for the SST k-ω-φ-α model. For the realizable k-ε and SST k-ω models, Prt = 0.85 and Prt = 0.92 produce the best results, respectively. For the realizable k-ε and the SST k-ω models, the two methods used to predict the rate of entropy generation due to friction irreversibility produce the same results. However, for the SST k-ω-φ-α model, the rates of entropy generation due to friction irreversibility predicted by the two methods are different. The difference at a Reynolds number of 100,000 is about 14%. The method that incorporates the effective turbulent viscosity should be used to predict the rate of entropy generation due to friction irreversibility for the SST k-ω-φ-α model. Furthermore, when the temperature in the flow field changes dramatically, the temperature-dependent fluid properties must be considered.

Entropy generation analysis and structure optimization of rectangular finned elliptical tube heat exchangers

Aero-thermal Behavior and Performance Optimization of Rectangular Finned Elliptical Heat Exchangers with Different Tube Arrangements

Numerical Study of Entropy Generation in Fully Developed Turbulent Circular Tube Flow Using an Elliptic Blending Turbulence Model

Research on the Thermal Hydraulic Performance and Entropy Generation Characteristics of Finned Tube Heat Exchanger with Streamline Tube

Entropy Generation Analysis on Pin Fin Heat Exchangers with Lateral Ejection Holes

Exergy Efficiency Design For Multi-Stream Plate-Fin Heat Exchangers Based On Entropy Generation Assessment

A STUDY ON THE FINS OF HEAT EXCHANGERS FROM OPTIMIZATION OF ENTROPY GENERATION

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

Entropy generation and thermodynamic analysis of pool boiling heat transfer on doubly enhanced tubes

Entropy Generation Analysis of Spiral Finned Tube Bundles During Heat Exchanging Process

Optimization of plate-fin heat exchangers by minimizing specific entropy generation rate

Optimization of Fin Geometry in Heat Convection with Entransy Theory

Analyses of Entransy Dissipation, Entropy Generation and Entransy–dissipation-Based Thermal Resistance on Heat Exchanger Optimization

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Heat transfer simulation of annular elliptical fin-and-tube heat exchanger by transition SST model

The Local Distribution of Temperatures and Entropy Generation Rate in an Ideal Counterflow Heat Exchanger

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Optimization Analysis of Thermodynamic Characteristics of Serrated Plate-Fin Heat Exchanger

Entropy Resistance Analyses of A Two-Stream Parallel Flow Heat Exchanger with Viscous Heating

Local entropy generation optimization and thermodynamic irreversibility analysis of oval-shaped coaxial ground heat exchangers: A detailed numerical investigation

Numerical Study on Airside Thermal-Hydraulic Performance of Rectangular Finned Elliptical Tube Heat Exchanger with Large Row Number in Turbulent Flow Regime