Direct nitrification of municipal wastewater by nitrifying bioactive filler

Hong YANG,Shan SU
DOI: https://doi.org/10.12030/j.cjee.201809145
2019-01-01
Abstract:In order to explore more applications of nitrification filler and provide the corresponding parameter reference for it, the municipal wastewater was directly treated by the nitrifying bioactive filler which was recovered by artificial wastewater. The effects of filler filling mode, filling ratio and DO concentration on the ammonia oxidation rate of the filler and the COD concentration in the device were investigated. The results showed that the maximum ammonia-oxidation rate of the filler could reach 30.2 mg· (L·h) -1 under the conditions of a dispersed filling method with a filling rate of 12% and a DO concentration of 4~5 mg·L-1, which was higher than that of the conventional activated sludge method. The filling rate is positively correlated with the ammonia oxidation rate as a whole. To some extent, the ammonia oxidation rate of the filler could be further improved by increasing the filling rate. The filler cleaning could prevent the growth of heterotrophic bacteria in the device and contribute to retain COD of municipal sewage. Generally, the nitrifying filler is used to directly nitrate municipal wastewater, which can not only keep a better ammonia oxidation rate, but also save carbon source for the subsequent denitrification and reduce sludge production in wastewater treatment process. Thus, it is feasible to use this method for direct nitrification of municipal wastewater.
What problem does this paper attempt to address?