Abstract:Sulfur- and nitrogen-containing organic industrial wastewaters, which primarily result from several processes, including pharmaceutical, slaughter, papermaking, and petrochemical processes, are typical examples of refractory wastewaters. To ensure resource utilization, sulfur compounds at high concentrations in such wastewaters can be converted to elemental sulfur through specific methods. Specifically, the denitrifying sulfide removal (DSR) process can be employed to effectively recover elemental sulfur via biological sulfide oxidation, and reportedly, bio-augmentation presents as an effective strategy by which the challenges that limit the application of the DSR process can be overcome. However, the bacterial loss resulting from microorganism activity inhibition owing to toxic effect of high sulfide concentration as well as the complexity of the organic matter (carbon source) in actual wastewater environments reduce the actual elemental sulfur production rate. In this regard, the bio-augmentation effect of adding fillers under complex carbon source conditions was studied. The structure and function of the microbial community on the surface of the fillers were also analysed to reveal the internal factors that contributed to the increased efficiency of elemental sulfur generation. The results obtained showed that relative to the control, elemental sulfur generation increased 1.5- and 2-fold following the addition of fillers and fillers with microbial inoculants, respectively. Further, in the reactor with the added filler, the dominant bacteria in the biofilm on the filler surface were Pseudomonas and Azoarcus, while in reactor with added fillers plus microbial inoculates, the dominant bacteria in the biofilm on the filler surface were Pseudomonas and Arcobacter. These findings indicated that bio-augmentation promoted the expression of sulfur oxidation functional genes. Furthermore, adding Pseudomonas sp. gs1 for bio-augmentation improved the impact load resistance of the biofilm on the surface of the filler, leading to the rapid restoration of the elemental sulfur generation rate after the impact.

PREPARATION OF NEW FILLER PVF AND ITS PERFORMANCE OF SIMULTANEOUS NITRIFICATION AND DENITRIFICATION

Preparation of suspended carrier PVF(polyvinyl alcohol-formaldehyde) foams and its performances in waste water treatment

Results of Adding Sludge Micropowder for Microbial Structure and Partial Nitrification and Denitrification in a Filamentous AGS-SBR Using High-Ammonia Wastewater

PREPARATION AND APPLICATION OF HIGH FOAMING E/VAC SUSPENDED FILLER FOR SEWAGE DISPOSAL

Use of dewatered sludge and fly ash to prepare new fillers: Application and evaluation in wastewater treatment

Preparation and Nitration Research of Highly Foamed EVA Suspension Carrier

Effects of two fillers and process conditions on the water treatment efficiency of a continuous packed bed biofilm reactor

Bio-augmentation of the filler-enhanced denitrifying sulfide removal process in expanded granular sludge bed reactors

Preparation and characterization of a novel multi-component composite biological filler

Enhancing the formation of simultaneous nitrification and denitrification (SND) biofilm and nitrogen removal performance using two-units IFFAS process filled with surface-modified carriers

Swelling problems in immobilized filler: an improvement method and comparative study of the effect of different fillers on biotrickling filters

Performance of System Consisting of Vertical Flow Trickling Filter and Horizontal Flow Multi-Soil-Layering Reactor for Treatment of Rural Wastewater

Gel beads prepared by polyvinyl alcohol cross-linking with phytic acid and Fe as novel microbial carriers for simultaneous partial nitrification, anammox and denitrification

High efficiency and stable partial nitration achieved via gel immobilization

Enhanced Simultaneous Nitrification and Denitrification Performance in a Fixed-Bed System Packed with PHBV/PLA Blends

Novel flocking materials as biocarriers in moving bed biofilm reactor for improving simultaneous nitrification and denitrification performance

Enhanced Simultaneous Nitrification and Denitrification Via Addition of Biodegradable Carrier Phragmites Communis in Biofilm Pretreatment Reactor Treating Polluted Source Water

Effect of Different Types of Fillers in Membrane Bioreactors for Greywater Treatment and Membrane Fouling

Advanced Research on Polymer Floating Carrier Application in Activated Sludge Reactors

Removal of Hydrogen Sulfide and Ammonia Using a Biotrickling Filter Packed with Modified Composite Filler

Denitrification performance and mechanism of sequencing batch reactor with a novel iron-polyurethane foam composite carrier