Abstract:Sulfur- and nitrogen-containing organic industrial wastewaters, which primarily result from several processes, including pharmaceutical, slaughter, papermaking, and petrochemical processes, are typical examples of refractory wastewaters. To ensure resource utilization, sulfur compounds at high concentrations in such wastewaters can be converted to elemental sulfur through specific methods. Specifically, the denitrifying sulfide removal (DSR) process can be employed to effectively recover elemental sulfur via biological sulfide oxidation, and reportedly, bio-augmentation presents as an effective strategy by which the challenges that limit the application of the DSR process can be overcome. However, the bacterial loss resulting from microorganism activity inhibition owing to toxic effect of high sulfide concentration as well as the complexity of the organic matter (carbon source) in actual wastewater environments reduce the actual elemental sulfur production rate. In this regard, the bio-augmentation effect of adding fillers under complex carbon source conditions was studied. The structure and function of the microbial community on the surface of the fillers were also analysed to reveal the internal factors that contributed to the increased efficiency of elemental sulfur generation. The results obtained showed that relative to the control, elemental sulfur generation increased 1.5- and 2-fold following the addition of fillers and fillers with microbial inoculants, respectively. Further, in the reactor with the added filler, the dominant bacteria in the biofilm on the filler surface were Pseudomonas and Azoarcus, while in reactor with added fillers plus microbial inoculates, the dominant bacteria in the biofilm on the filler surface were Pseudomonas and Arcobacter. These findings indicated that bio-augmentation promoted the expression of sulfur oxidation functional genes. Furthermore, adding Pseudomonas sp. gs1 for bio-augmentation improved the impact load resistance of the biofilm on the surface of the filler, leading to the rapid restoration of the elemental sulfur generation rate after the impact.

PREPARATION AND APPLICATION OF HIGH FOAMING E/VAC SUSPENDED FILLER FOR SEWAGE DISPOSAL

Preparation of suspended carrier PVF(polyvinyl alcohol-formaldehyde) foams and its performances in waste water treatment

PREPARATION OF NEW FILLER PVF AND ITS PERFORMANCE OF SIMULTANEOUS NITRIFICATION AND DENITRIFICATION

Use of dewatered sludge and fly ash to prepare new fillers: Application and evaluation in wastewater treatment

Preparation and Nitration Research of Highly Foamed EVA Suspension Carrier

Application of Flocculation Combined with Vacuum Preloading to Reduce River-Dredged Sludge

Preparation and characterization of a novel multi-component composite biological filler

Performance and Working Mechanism of a Novel Anaerobic Self-Flotation Reactor for Treating Wastewater with High Suspended Solids

Preparation of ceramic filler from reusing sewage sludge and application in biological aerated filter for soy protein secondary wastewater treatment.

Vacuum Preloading Combined with Multiple-Flocculant Treatment for Dredged Fill Improvement

A Study on the Characteristic Features of Feces Decomposition by Using Sawdust As Microbial Carrier for an Aerobic Compositing Reactor

Preparation of crosslinked macroporous PVA foam carrier for immobilization of microorganisms

Study on Treating Wastewater Containing Strong Ammonium by Immobilized Microorganism of Modified Carrier

Sewage Purification by Micro Eco-system of Different Structures

Studies on the performance of bionic aquatic filler biological contact oxidation tank for wastewater treatment based on microbubble aeration

Preparation and characteristics of a novel packing material for VOC gas-phase fluidized-bed bioreactor

Application of a hybrid-fruit-peel (HFP) coagulant in low carbon source wastewater treatment as an external carbon source

Bio-augmentation of the filler-enhanced denitrifying sulfide removal process in expanded granular sludge bed reactors

PREPARATION OF CATIONIC POLYURETHANE FOAM CARRIERS AND THEIR ADSORPTION PROPERTIES FOR ACTIVATED SLUDGE

Hydraulic flow pattern and performance of swirling flow anaerobic attached growth film expanded bed bioreactor

Influence of filling ratio and carrier type on organic matter removal in a moving bed biofilm reactor with pretreatment of electrocoagulation in wastewater treatment