Abstract:Four anaerobic ammonium oxidation (anammox) immobilized filler reactors (R1: 33 °C-normal, R2: seasonal temperature-normal, R3: seasonal temperature-feast, R4: seasonal temperature-starvation) were established to study the response of anammox immobilized fillers to seasonal temperature changes and different operating modes. The results showed that the anammox immobilized filler could better adapt to the seasonal temperature drop and maintain the activity potential by adjusting the hydraulic retention time (HRT). During the temperature rise phase, R2 activity increased rapidly with the highest nitrogen removal rate reaching 1.26 kgN·(m3·d)-1, which was equivalent to control sample R1 (1.33 kgN·(m3·d)-1). However, feasting and famine conditions severely impaired anammox performance and changed stoichiometric ratios; feasting, in particular, significantly lowered the nitrogen removal potential of R3. The specific anammox activity of R2, R3 and R4 was 92.2%, 52.6% and 67.9%, respectively, that of R1, respectively, where the accumulation of functional bacteria was the reason for the higher activity of R2. Degradation kinetics and NO2--N inhibition curves showed that R3 was less sensitive to high concentrations of NH4+-N, while R4 responded earlier to low concentrations of NH4+-N, and the reduction of IC50 at low temperature was the reason for the inhibition of R3 activity. Furthermore, seasonal temperature fluctuations had little effect on the microbial community structure but had a considerable impact on bacteria abundance. The anammox functional bacteria Candidatus Kuenenia was found to be the dominant genus in R1-R4; however, the relative abundance of most bacteria, including anammox bacteria, decreased in R3, while the proportion of fermentation bacteria and denitrifying bacteria increased in R4. These findings highlight the necessity of rational regulation of HRT for the adaptation of anammox immobilized fillers to seasonal temperature changes, which could enhance our understanding of the synergistic effect of seasonal temperature changes and different operating modes on nitrogen removal.

[Environmental Factors Influence and Microbial Community Structure Analysis of Entrapped Anaerobic Ammonium Oxidizing Bacteria]

Effects of Biomass and Environmental Factors on Nitrogen Removal Performance and Community Structure of an Anammox Immobilized Filler.

Rapid Start-Up of Anammox by Immobilization and Its Response to Low Temperature Stress

The Anammox Process at Typical Feast-Famine States: Reactor Performance, Sludge Activity and Microbial Community

Promoting Sludge Quantity and Activity Results in High Loading Rates in Anammox UBF.

Nitrogen Removal Characteristics and Microbial Community Structure Analysis of Annamox-Bacteria Immobilized Using Polyethylene Glycol Diacrylate

Effect of the form of granular sludge and temperature on anammox immobilized fillers: From performance to microbial community analysis

Enhancing nitrogen removal performance in a bioreactor using immobilized anaerobic ammonium oxidation sludge by polyvinyl alcohol-sodium alginate (PVA-SA)

Mechanism of gel immobilization driving efficient anammox in mainstream partial nitritation/anammox process: Structural characterization and multi-perspective microbial analysis

Characterization and Comparison of Anammox Immobilization in Polyvinyl Alcohol, Polyethylene Glycol and Water-Borne Polyurethane

Nitrogen Removal Performance of Anammox Immobilized Fillers in Response to Seasonal Temperature Variations and Different Operating Modes: Substrate Utilization and Microbial Community Analysis

Anaerobic Ammonium Oxidation in Polyvinyl Alcohol and Sodium Alginate Immobilized Biomass System: a Potential Tool to Maintain Anammox Biomass in Application.

ANAMMOX performance, granulation, and microbial response under COD disturbance

Nitrogen Removal Performance of Immobilized Anammox Sludge

Enrichment and retention of key functional bacteria of partial denitrification-Anammox (PD/A) process via cell immobilization: A novel strategy for fast PD/A application

Analysis of Key Microbial Community During the Start-Up of Anaerobic Ammonium Oxidation Process with Paddy Soil As Inoculated Sludge.

Insight into nitrogen removal performance of anaerobic ammonia oxidation in two reactors: Comparison based on the aspects of extracellular polymeric substances and microbial community

Performance and mechanism analysis of gel immobilized anammox bacteria in treating different proportions of domestic wastewater: a valid alternative to granular sludge

Analyzing the effect of storage conditions on anammox recovery performance from the perspectives of time, temperature and biomass form

Enrichment of Anammox Bacteria Using Anammox Sludge as a Primer Combined with Ordinary Activated Sludge

Activated sludge under free ammonia treatment using gel immobilization technology for long-term partial nitrification with different initial biomass