Abstract:Sulfur- and nitrogen-containing organic industrial wastewaters, which primarily result from several processes, including pharmaceutical, slaughter, papermaking, and petrochemical processes, are typical examples of refractory wastewaters. To ensure resource utilization, sulfur compounds at high concentrations in such wastewaters can be converted to elemental sulfur through specific methods. Specifically, the denitrifying sulfide removal (DSR) process can be employed to effectively recover elemental sulfur via biological sulfide oxidation, and reportedly, bio-augmentation presents as an effective strategy by which the challenges that limit the application of the DSR process can be overcome. However, the bacterial loss resulting from microorganism activity inhibition owing to toxic effect of high sulfide concentration as well as the complexity of the organic matter (carbon source) in actual wastewater environments reduce the actual elemental sulfur production rate. In this regard, the bio-augmentation effect of adding fillers under complex carbon source conditions was studied. The structure and function of the microbial community on the surface of the fillers were also analysed to reveal the internal factors that contributed to the increased efficiency of elemental sulfur generation. The results obtained showed that relative to the control, elemental sulfur generation increased 1.5- and 2-fold following the addition of fillers and fillers with microbial inoculants, respectively. Further, in the reactor with the added filler, the dominant bacteria in the biofilm on the filler surface were Pseudomonas and Azoarcus, while in reactor with added fillers plus microbial inoculates, the dominant bacteria in the biofilm on the filler surface were Pseudomonas and Arcobacter. These findings indicated that bio-augmentation promoted the expression of sulfur oxidation functional genes. Furthermore, adding Pseudomonas sp. gs1 for bio-augmentation improved the impact load resistance of the biofilm on the surface of the filler, leading to the rapid restoration of the elemental sulfur generation rate after the impact.

A case study on application and commissioning of coal pyrolysis wastewater treatment project

Effects of Microbiological Diversity in the Anoxic-Oxic-settling-anaerobic Process Strengthened by Humic Biological Composite Fillers

Effects of polyurethane foam carrier addition on anoxic/aerobic membrane bioreactor (A/O-MBR) for coal gasification wastewater (CGW) treatment: Performance and microbial community structure

Degradation and Filling Modification of Plastic Waste for Improvement of the Slurryability of Coal-Plastic-water Slurry

Effects of two fillers and process conditions on the water treatment efficiency of a continuous packed bed biofilm reactor

Study on treatment of chemical plant wastewater by using a integrated anaerobic–aerobic bioreactor

Multi-stage oxic biofilm system for pilot-scale treatment of coking wastewater: Pollutants removal performance, biofilm properties and microbial community

Modification of Polyurethane Sponge Filler Using Medical Stones and Application in a Moving Bed Biofilm Reactor for Ex Situ Remediation of Polluted Rivers

Bio-augmentation of the filler-enhanced denitrifying sulfide removal process in expanded granular sludge bed reactors

A Magic Filter Filled with Waste Plastic Shavings, Loofah, and Iron Shavings for Wastewater Treatment

Use of dewatered sludge and fly ash to prepare new fillers: Application and evaluation in wastewater treatment

Studies on the performance of bionic aquatic filler biological contact oxidation tank for wastewater treatment based on microbubble aeration

High-Value and Environmentally Friendly Recycling Method for Coal-Based Solid Waste Based on Polyurethane Composite Materials

Treatment of Catalyst Wastewater in a Three-Phase Flow Airlift Loop Bioreactor

BACTERIA IMMOBILIZED ON MICROPOROUS POLYURETHANE TO ENHANCE CAMPUS SEWAGE TREATMENT IN CONSTRUCTED WETLANDS MICROCOSMOS

Pilot Study on Advanced Treatment of Wastewater Produced by Pressurized Coarse Coal Gasification

Identification of key toxic substances in pyrolysis wastewater and proposal of improvement strategies for pretreatment

Hybrid peroxymonosulfate/activated carbon fiber-sequencing batch reactor system for efficient treatment of coking wastewater: Establishment and influential factors

Preparation and characterization of a novel multi-component composite biological filler

High-load domestic wastewater treatment using a combined anaerobic-aerobic bio-filter with coal cinder as medium

Effectiveness of a novel composite filler to enhance phosphorus removal in constructed wetlands