Abstract:During the operation of a steam turbine, its structural elements are subjected to significant thermal and mechanical loads. The consequence of the long-term effect of such a load is the accumulation of scattered fatigue damage to the material of the structural elements of the steam turbine, which is localized over time in the form of fatigue cracks of various types. Evidence of this is several accidents and catastrophic failures of steam turbines due to significant fatigue damage to the shafting. The localization of damage in turbine rotors is facilitated by stress concentration in the gouges and fillets, as well as damage to the surface layer of the rotors during the thermomechanical treatment stage since all metal processing operations (forging, turning and milling, heat treatment) are accompanied by plastic deformation of the material. One of the reasons for the long-term accumulation of fatigue damage in the structural elements of steam turbines is thermal stresses, which can reach dangerous values during turbine startup operations. In certain parts of the rotors, these stresses are sufficient to cause scattered fatigue damage to the material (the so-called thermoplasticity), especially when starting the turbine from a cold state. In the case of crack initiation, the thermal stresses are all the more sufficient for its further intensive development even when starting the turbine from uncooled and hot states, which are less damaging than starting from the cold state. To study the intensity of crack growth in the turbine rotor due to thermal stresses arising during turbine startup, a computational model based on using a finite element model of the shaft of the K-200-130 steam turbine and fracture mechanics approaches is proposed. Studies based on the proposed computational model have demonstrated the ability to predict the process of crack growth in the rotor due to turbine startup from different thermal states and assess its danger to structural integrity. The initial size of the internal annular crack was determined, which has the potential for further intensive growth under the influence of thermal stresses.

Thermal analysis for fast start up of non-continuous rotor considering thermal contact resistance

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Optimization of Start-up Process in Combined Cycle Steam Turbine of a Power Plant

Study on Quick Start-up of Steam Turbine in a Gas-Steam Combined Cycle

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Optimization on Start-up Process of Steam Turbine in Combined Cycle Generating Units

Transient Thermal Stress Analysis of Power Turbine Welded Rotor in a Heavy-Duty Gas Turbine During Rapid Load Changes

Damage Analysis and Start-Up Schedule Optimization of Steam Turbine Rotors With an Anisotropic Damage Coupled Viscoplastic Constitutive Model

Research on low temperature brittleness of 30Cr1Mo1V high-temperature rotor and its life optimization in rapid start-up and warm-up process

Dynamic Modeling and Experimental Modal Analysis for the Central Rod-Fastened Rotor With Hirth Couplings Based on Fractal Contact Theory

Patterns of Growth of an Internal Annular Crack Under the Influence of Thermal Stresses During Turbine Startup

Thermal Growth Simulations Of The Rotor And Auxiliary Bearing Contact Events

Equivalent thin-layer temperature field model (ETTM) for bolted rotors to describe interface temperature jump

Thermal-Fluid-Solid Coupling Analysis on the Temperature and Thermal Stress Field of a Nickel-Base Superalloy Turbine Blade

Dynamic Analysis of Turbocharger Rotor Bearing with an Integrated Three Dimensional Thermohydrodynamic Model

The Influence Made by the Central Hole of Steam Turbine Rotor to Temperature and Stress Distribution of Rotor

Flow-thermo-elastic coupled vibration characteristics of aeroengine high pressure rotor at the typical start and stop conditions

An analytical study of rotor dynamics coupled with thermal effect for a continuous rotor shaft

Research on infrared nondestructive testing and thermal effect analysis of small wind turbine blades under natural excitation

Analysis of High-Speed Rotor Vibration Failure Due to Sudden Angular Deformation of Bolt Joints

Effects of Cooling Structure on Thermal Strain Characteristic of High-Pressure Turbine Guide Vane