Abstract:During the operation of a steam turbine, its structural elements are subjected to significant thermal and mechanical loads. The consequence of the long-term effect of such a load is the accumulation of scattered fatigue damage to the material of the structural elements of the steam turbine, which is localized over time in the form of fatigue cracks of various types. Evidence of this is several accidents and catastrophic failures of steam turbines due to significant fatigue damage to the shafting. The localization of damage in turbine rotors is facilitated by stress concentration in the gouges and fillets, as well as damage to the surface layer of the rotors during the thermomechanical treatment stage since all metal processing operations (forging, turning and milling, heat treatment) are accompanied by plastic deformation of the material. One of the reasons for the long-term accumulation of fatigue damage in the structural elements of steam turbines is thermal stresses, which can reach dangerous values during turbine startup operations. In certain parts of the rotors, these stresses are sufficient to cause scattered fatigue damage to the material (the so-called thermoplasticity), especially when starting the turbine from a cold state. In the case of crack initiation, the thermal stresses are all the more sufficient for its further intensive development even when starting the turbine from uncooled and hot states, which are less damaging than starting from the cold state. To study the intensity of crack growth in the turbine rotor due to thermal stresses arising during turbine startup, a computational model based on using a finite element model of the shaft of the K-200-130 steam turbine and fracture mechanics approaches is proposed. Studies based on the proposed computational model have demonstrated the ability to predict the process of crack growth in the rotor due to turbine startup from different thermal states and assess its danger to structural integrity. The initial size of the internal annular crack was determined, which has the potential for further intensive growth under the influence of thermal stresses.

Damage Analysis and Start-Up Schedule Optimization of Steam Turbine Rotors With an Anisotropic Damage Coupled Viscoplastic Constitutive Model

Optimization of Start-up Process in Combined Cycle Steam Turbine of a Power Plant

Optimization on Start-up Process of Steam Turbine in Combined Cycle Generating Units

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Study on Quick Start-up of Steam Turbine in a Gas-Steam Combined Cycle

INFLUENCE OF SIMPLIFYING SHAFT-SEAL GROOVES UPON THERMAL STRESS CALCULATION RESULT OF STEAM TURBINE'S ROTOR

A Hybrid Modeling Method of Fatigue Crack Growth for Gas Turbine Blades under Combined High and Low Cycle Fatigue Loadings

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Analysing the Influence in Real-Time Calculation Fatigue Consume Caused by Model Layer of Turbing Rotor

Constitutive Model Based Efficient Creep-Fatigue Damage Computation Technique for Steam Turbine Rotors to Enhance Flexible Operational Capabilities

Patterns of Growth of an Internal Annular Crack Under the Influence of Thermal Stresses During Turbine Startup

Physically-based modeling of cyclic softening and damage behaviors for a martensitic turbine rotor material at elevated temperature

A New Energy-Critical Plane Damage Parameter for Multiaxial Fatigue Life Prediction of Turbine Blades

Multiaxial creep–fatigue failure mechanism and life prediction of a turbine blade based on a unified numerical solution approach

Research on low temperature brittleness of 30Cr1Mo1V high-temperature rotor and its life optimization in rapid start-up and warm-up process

Multi-Objective Optimization of Economy, Safety and Emissions for the Startup Scheduling of a Steam Turbine

Patterns of Transverse Crack Growth in a Steam Turbine Rotor Model Under Dynamic Loading

Estimation of Fatigue Crack Growth at Transverse Vibrations of a Steam Turbine Shaft

Data-physics-model based fatigue reliability assessment methodology for high-temperature components and its application in steam turbine rotor

Research on a Method for Online Damage Evaluation of Turbine Blades in a Gas Turbine Based on Operating Conditions

A Combined High and Low Cycle Fatigue Model for Life Prediction of Turbine Blades