Abstract:The eccentric force exerted on the mandrel by the rollers has important influence on the forming precision of tubular workpieces during tube spinning, which is closely related to the roller distribution mode. In this study, the deformation characteristics and spinning forces were investigated during tube spinning with different roller distribution modes. According to the simulation results, the contact zones under the rollers were analyzed and the spinning forces applied by various rollers were obtained. The results show that the stress distribution exhibits non-periodic change along circumferential direction and the spinning forces of various rollers are different because the non-uniform distribution of the rollers leads to different contact zone areas under the rollers. The variation of spinning forces of the rollers causes the unbalanced load exerted on the mandrel, thus the mandrel deviates from the neutral axis, which is verified by the deflection measurement of the mandrel end in the spinning experiment. Although the spinning forces of the rollers on the same side are different, four-roller spinning can keep the balance of the mandrel. In addition, stagger spinning with nonuniformly distributed three rollers is newly proposed to achieve the balance of the mandrel, increasing the flexibility of traditional two-roller spinning machine.

Numerical Simulation and Experiment Study on Tube Spinning of GH625 Reducer Tube

3D Rigid–plastic FEM Numerical Simulation on Tube Spinning

Plasticity Improvement of Ball-Spun Magnesium Alloy Tube Based on Stress Triaxiality

Numerical simulation and experimental study on non-axisymmetric spinning with a groove at the middle of the tube

FEM Simulation of Tube Spinning with Non-Symmetric Distribution of Three Rollers

Numerical Simulation of Fan Casing Expanding Spinning

Numerical Simulation Research on A New Spinning Process: Double-Roller Clamping Spinning Process

Spinning Process of 2219 Aluminum Alloy Tubes for Used in Hydroforming

Study on Numerical Simulation for Control of Winding Process of Thin Wall Spiral Tube

A Study of 3D Finite Element Modeling Method for Stagger Spinning of Thin-Walled Tube

Numerical Simulation of Influence of Roller Working Surface on Spin-Forming of Rectangular Inner Meshing Gear

Numerical Simulation of Influences of Process Parameters on the Spinning Moment and Quality of Double-Roller Clamping Spinning

Numerical Simulation of Double Rollers Clamping Spinning Process for Flanging

Finite element simulation of backward ball spinning of thin-walled tube with longitudinal inner ribs

Influence of Inner Roller Geometric Parameters on Counter-Roller Spinning with 6061 Aluminum Alloy Tube

Study of Dieless Radial Spinning for Thick-Walled Cylindrical Parts With External Grooves

Numerical simulation of hot ball spinning of NiTi shape memory alloy tube

Deformation analysis of hot spinning of NiTi alloy tube based on different wall thickness reduction

Influence of Roller Distribution Modes on Spinning Force During Tube Spinning

Analysis of Backward Ball Spinning of Thin-Walled Tube Part with Longitudinal Inner Ribs Based on FEM

Study on Counter-Roller Spinning Technology of Large Diameter Aluminum Alloy Cylindrical Parts