Abstract:Since the application of silicon materials in electronic devices in the 1950s, microprocessors are continuously getting smaller, faster, smarter, and larger in data storage capacity. One important factor that makes progress possible is decreasing the dielectric constant of the insulating layer within the integrated circuit (IC). Nevertheless, the evolution of interlayer dielectrics (ILDs) is not driven by a single factor. At first, the objective was to reduce the dielectric constant (k). Reduction of the dielectric constant of a material can be accomplished by selecting chemical bonds with low polarizability and introducing porosity. Moving from silicon dioxide, silsesquioxane-based materials, and silica-based materials to porous silica materials, the industry has been able to reduce the ILDs’ dielectric constant from 4.5 to as low as 1.5. However, porous ILDs are mechanically weak, thermally unstable, and poorly compatible with other materials, which gives them the tendency to absorb chemicals, moisture, etc. All these features create many challenges for the integration of IC during the dual-damascene process, with plasma-induced damage (PID) being the most devastating one. Since the discovery of porous materials, the industry has shifted its focus from decreasing ILDs’ dielectric constant to overcoming these integration challenges. More supplementary precursors (such as Si–C–Si structured compounds), deposition processes (such as NH3 plasma treatment), and post porosity plasma protection treatment (P4) were invented to solve integration-related challenges. Herein, we present the evolution of interlayer dielectric materials driven by the following three aspects, classification of dielectric materials, deposition methods, and key issues encountered and solved during the integration phase. We aim to provide a brief overview of the development of low-k dielectric materials over the past few decades.

CVD technologies used in preparation of low dielectric constant CVD technologies used in preparation of low dielectric constant

Preparation Of Low-K Nanoporous Sio2 Films By Plasma-Enhanced Chemical Vapor Deposition

Porous Amorphous Fluoropolymer Films with Ultralow Dielectric Constant

Preparation Methods and Advance of Plastic Based Nano/Mesoporous Dielectric Materials

Low Dielectric Constant SiO2:C,F Films Prepared from Si(OC2H5)4/C4F8/Ar by Plasma-Enhanced CVD

The Evolution of Organosilicon Precursors for Low-k Interlayer Dielectric Fabrication Driven by Integration Challenges

Progress in Preparation of Low Dielectric Constant Polyimide by Chemical Method

Pioneering Fast and Safe Low-k Silicon Dioxide Synthesis for Modern Integrated Circuits

Pure Silica Zeolite Films as Low-k Dielectrics by Spin-On of Nanoparticle Suspensions

DEVELOPMENT OF LOW DIELECTRIC CONSTANT POLYMER MATERIALS

Preparation and characterization of low-dielectric-constant F-doped SiOCN films by PECVD

Nano/Mesoporous Polymers Based Low‐k Dielectric Materials: A Review on Methods and Advances

Study on Silicon Films Prepared by Inductively Coupled Plasma CVD

Research on Preparation Processes of Low-Temperature Poly-Silicon Films

Low-dielectric-constant Α-Sicof Film for ULSI Interconnection Prepared by PECVD with TEOS/C4F8/O2

Ultrathin Cusin/P-Sic:H Bilayer Capping Barrier for Cu/Ultralow-K Dielectric Integration

Low dielectric constant films deposited by PECVD using tetraethoxysilane and limonene as precursors

Low- k SiO x /AlO x Nanolaminate Dielectric on Dielectric Achieved by Hybrid Pulsed Chemical Vapor Deposition

Plasma enhanced chemical vapor deposition ultralow dielectric constant films using triethoxymethylsilane and limonene as precursors

Preparation and characterization of nanoporous polyimide membrane by the template method as low‐k dielectric material

Dielectric Materials in Semiconductor Devices