Abstract:<p>Solution‐processed zinc oxide (ZnO) is one of the widely used electron transporting layers (ETLs) for organic solar cells (OSCs). However, low optical transparency along with thickness‐sensitivity of ZnO ETL constrains the improvement of photovoltaic performance and large‐scale fabrication compatibility. To resolve these issues, zirconium (Zr) doping is applied to tailor the optoelectronic and morphological properties of ZnO layer. This approach not only improves light transmittance with the suppressed parasitic absorption, but also provides an optimized surface morphology for enhancing charge extraction property and reducing potential of charge trap‐assisted recombination. By using ZnO:Zr as ETL in inverted device configuration, the maximum power conversion efficiency (PCE) of PM6:Y6:PC<sub>71</sub>BM solar cell devices is up to 17.2%, which makes an enhancement of 9.55% compared to ZnO‐based devices (15.7%). As the thickness of ZnO:Zr ETL increases to ≈60 nm, the presence of the lower parasitic absorption together with uniform surface morphology can help photovoltaic performance maintain above 15%, which is beyond the performance of the pristine ZnO‐based device achieving only 11.9%. Such superiority of ZnO:Zr ETL is also validated by a series of well‐known BHJ systems, where in comparison with the devices based on pristine ZnO ETL, a better photovoltaic performance from ZnO:Zr device can be achieved.</p>

Fabrication of in Doped ZnO Thin Films by Spray Pyrolysis As Photoanode in DSSCs

A Facile Self-assembly Synthesis of Hexagonal ZnO Nanosheet Films and Their Photoelectrochemical Properties

Fabrication of dye-sensitized solar cells with ZnO nanorods as photoanode and natural dye extract as sensitizer

Electrodeposited Nanoporous ZnO Films Exhibiting Enhanced Performance in Dye-Sensitized Solar Cells

Indium-Doped Zinc Oxide Thin Films As Effective Anodes of Organic Photovoltaic Devices

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

Fabrication of ZnO/ZnO @ carbon dot as photo anode and Natural dye as photosensitizer for dye sensitized solar cell application

Preparation of ZnO：In Transparent Conductive Oxide Thin Films for Silicon Thin Film Solar Cell by Ultrasonic Spray Pyrolysis

Direct Conversion of Two-Dimensional Zif-L Film to Porous Zno Nano-Sheet Film and Its Performance As Photoanode in Dye-Sensitized Solar Cell

Controllable Preparation of 2D and 3D ZnO Micro-Nanostructures and Their Photoelectric Conversion Efficiency

Synthesis of Zno Nanostructure Films by Thermal Evaporation Approach and Their Application in Dye-Sensitized Solar Cells

Preparation of flexible SnO2/ZnO composite photoelectrode and its application in dye-sensitized solar cells

Fabrication and Photo-Detecting Performance of 2d Zno Inverse Opal Films

Fabrication of High-Performance F and Al Co-Doped ZnO Transparent Conductive Films for Use in Perovskite Solar Cells

Fabrication, Characteristics and Application in Dye-Sensitized Solar Cell of Vertically Alligned ZnO Nanorod Arrays Guided with Polyethyleneimine via Hydrothermal Method

Polydisperse Spindle-Shaped ZnO Particles with Their Packing Micropores in the Photoanode for Highly Efficient Quasi-Solid Dye-Sensitized Solar Cells

Effect of Oxygen Concentration on Properties of Indium Zinc Oxide Thin Films for Flexible Dye-Sensitized Solar Cell

Performances of ZnO-Based Dye Sensitized Solar Cells Fabricated by Hydrothermal Synthesis and Sol-Gel Technique

Fabrication of in 2 O 3 /zno Hetero-Epitaxial-junctions with Enhanced PEC Performances

Electrodeposition Zinc-Oxide Inverse Opal and Its Application in Hybrid Photovoltaics

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells