Abstract:Tin-doped indium oxide (ITO) deposited by vacuum process with excellent optical and electrical properties have been generally used as transparent conductive oxide thin films. In view of high cost and difficulty in recycles for vacuum process, zinc oxide films synthesized by wet chemical process are therefore regarded as a more suitable candidate to replace ITO. In this work, sol-gel method was used to synthesize transparent aluminum-doped zinc oxide (ZnO:Al, AZO) with 450nm thickness for large scale production of CIGS solar cell. The experimental parameters included different solvents, the propylene glycol methyl ether (PGME) to replace the usually used solvent ethylene glycol monomethyl ether (EGME) which is toxic, the amount of Al dopant (ranged from 0 to 2 at%), and various annealing temperatures. The structure, electrical and optical properties of AZO thin films are investigated by a field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), four-point probe (FPP) and ultraviolet visible light spectroscope (UV-VIS) etc. The experimental results showed that the AZO films were wurtzite crystalline with c-axis preferred orientation and had > 85% transmittance and lower electrical resistivity after annealed in N2 atmosphere. The optimum AZO samples had low electrical resistivity of 1.94¥10-2 Ω-cm, which were synthesized with PGME solvent, 1 at% Al-doping and annealed at 600°C in N2 atmosphere and 500°C in 95 N2/5 H2 atmosphere for one hour, separately.

Fabrication of High-Performance F and Al Co-Doped ZnO Transparent Conductive Films for Use in Perovskite Solar Cells

Effects of thickness on photoelectric properties and perovskite solar cells application of transparent conductive F and Al co-doped ZnO films

Radio frequency magnetron sputtering deposition of low-resistivity and broad-spectral transmission F and Al co-doped ZnO film with mobility exceeding 50 cm2 V−1 s−1

Investigation of Physical Properties of F-and-Ga Co-Doped ZnO Thin Films Grown by RF Magnetron Sputtering for Perovskite Solar Cells Applications

Effect of Substrate Temperature on F and Al Co-Doped ZnO Films Deposited by Radio Frequency Magnetron Sputtering

Preparation of Aluminum Doped Zinc Oxide Films with Low Resistivity and Outstanding Transparency by a Sol–gel Method for Potential Applications in Perovskite Solar Cell

Single Crystalline Transparent Conducting F, Al, and Ga Co-Doped ZnO Thin Films with High Photoelectrical Performance

Fluorine, chlorine, and gallium co-doped zinc oxide transparent conductive films fabricated using the sol-gel spin method

Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications

Increased Efficiency For Perovskite Photovoltaics Based On Aluminum-Doped Zinc Oxide Transparent Electrodes Via Surface Modification

High-performance low-temperature transparent conducting aluminum-doped ZnO thin films and applications

Fabrication of AZO and FAZO films using low-cost spin-coating method

Simulation, Fabrication, and Application of Transparent Conductive Mo-Doped Zno Film in A Solar Cell

Aluminum doped ZnO transparent conducting thin films prepared by sol-gel dip coating technique for solar cells and optoelectronic applications

Synthesis of ZnO:Al Transparent Conductive Thin Films Using Sol-gel Method

Fabrication of Flexible Al-doped ZnO Films Via Sol–gel Method

Textured transparent conductive B/Al doped ZnO films utilizing reactive magnetron sputtering

Method for Fabricating Textured High-Haze ZnO:Al Transparent Conduction Oxide Films on Chemically Etched Glass Substrates

The fabrication and application of ZnO:Al thin films in low-frequency inductively coupled plasma fabricated silicon solar cell

Highly Surface-Textured and Conducting Zno:Al Films Fabricated from Oxygen-Deficient Target for Cu(In, Ga)Se-2 Solar Cell Application

Structural ,Electrical ,and Optical Properties of Transparent Conductive Al-Doped ZnO Films Prepared by RF Magnetron Sputtering