Abstract:This study investigates the structural, morphological, optical, and electrical characteristics of Al 3+ and Sn 4+ doped ZnO nano-crystalline thin films fabricated using a sol–gel spin coating technique. The thin-films, with a uniform thickness of 200 nm (2% fabrication tolerance), were analyzed using scanning electron microscopy (SEM) and x-ray diffractometry (XRD) to evaluate surface profilometry, uniformity, and material compositions. The structural analysis revealed gradual improved crystalline properties up to 6 at.% Al doping and 4 at.% Sn doping, beyond which crystallinity deteriorated. Optical parameters, including optical conductivity, bandgaps, absorption index, and dielectric indices, were determined using an ultraviolet–visible (UV–Vis) spectrophotometer. The absorption indices (higher range in 0.0043–0.0046 mm for 2 at.% AZO) exhibited a non-linear relationship with bandgap energies in both types of films. The films demonstrated high mean transmittance (96%) and small grain size (~ 20 nm), indicating their suitability for various optoelectronic applications. The films also exhibited low carrier concentration rates, with specific concentrations showing optimal mobility and resistivity values. The highest and lowest FoM values were identified as 850 (10 –6 Ω −1 ) for 6 at.% Sn and 1.06 (10 –6 Ω −1 ) respectively. The study provides a rare comparison between AZO and SZO thin films, providing valuable insights into the enhanced properties of Al 3+ and Sn 4+ doped ZnO thin films, emphasizing their potential for diverse technological applications (e.g. optoelectronic devices and organic solar cells) used as conductive oxides and optically transparent electrodes.

Aluminum doped ZnO transparent conducting thin films prepared by sol-gel dip coating technique for solar cells and optoelectronic applications

Surface Topography and Optical Properties of Al-doped ZnO Thin Films by Sol-gel Process

Room Temperature Sputtered Aluminum-Doped ZnO Thin Film Transparent Electrode for Application in Solar Cells and for Low-Band-Gap Optoelectronic Devices

Preparation of Aluminum Doped Zinc Oxide Films with Low Resistivity and Outstanding Transparency by a Sol–gel Method for Potential Applications in Perovskite Solar Cell

Preparation of Aluminum Doped Zinc Oxide Films and the Study of Their Microstructure, Electrical and Optical Properties

Semiconducting properties of Al doped ZnO thin films

Optical and structural properties of Al-doped ZnO thin films by sol gel process

Conductive and optically transparent sol–gel spin coated Al3+ and Sn4+ doped ZnO nano-crystalline thin-films

Effect of Al-doped on Optics and Electricity of ZnO (ZnO∶Al) Thin Films

Effect of Film Thickness on Properties of Al-Doped Zno Film As Transparent Conducting Electrodes in Oleds

Synthesis of ZnO:Al Transparent Conductive Thin Films Using Sol-gel Method

High-performance low-temperature transparent conducting aluminum-doped ZnO thin films and applications

Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications

Optical and electrical properties of Al-doped ZnO thin films deposited by sol-gel method

Transparent Conductive Al-Doped Zno Thin Films Grown at Room Temperature

Tailoring of Optical and Electrical Properties of Transparent and Conductive Al-doped ZnO Films by Adjustment of Al Concentration

MICROSTRUCTURE, OPTICAL AND ELECTRICAL PROPERTIES OF ZnO:Al FILM PREPARED BY SOL-GEL METHOD

Effect of aluminum doping on zinc oxide thin films grown by pulsed laser deposition for organic light-emitting devices

An Anode with Aluminum Doped on Zinc Oxide Thin Films for Organic Light Emitting Devices

Structural ,Electrical ,and Optical Properties of Transparent Conductive Al-Doped ZnO Films Prepared by RF Magnetron Sputtering

Self-Flattened ZnO:Al Transparent Conductive Thin Films Derived by Sol–Gel Process