Abstract:This report focuses on the evaluation of the electrochemical properties of both solution-deposited sol-gel (sg-ZnO) and sputtered (sp-ZnO) zinc oxide thin films, intended for use as electron-collecting interlayers in organic solar cells (OPVs). In the electrochemical studies (voltammetric and impedance studies), we used indium-tin oxide (ITO) over coated with either sg-ZnO or sp-ZnO interlayers, in contact with either plain electrolyte solutions, or solutions with probe redox couples. The electroactive area of exposed ITO under the ZnO interlayer was estimated by characterizing the electrochemical response of just the oxide interlayer and the charge transfer resistance from solutions with the probe redox couples. Compared to bare ITO, the effective electroactive area of ITO under sg-ZnO films was ca. 70%, 10%, and 0.3% for 40, 80, and 120 nm sg-ZnO films. More compact sp-ZnO films required only 30 nm thicknesses to achieve an effective electroactive ITO area of ca. 0.02%. We also examined the electrochemical responses of these same ITO/ZnO heterojunctions overcoated with device thickness pure poly(3-hexylthiophehe) (P3HT), and donor/acceptor blended active layers (P3HT:PCBM). Voltammetric oxidation/reduction of pure P3HT thin films on ZnO/ITO contacts showed that pinhole pathways exist in ZnO films that permit dark oxidation (ITO hole injection into P3HT). In P3HT:PCBM active layers, however, the electrochemical activity for P3HT oxidation is greatly attenuated, suggesting PCBM enrichment near the ZnO interface, effectively blocking P3HT interaction with the ITO contact. The shunt resistance, obtained from dark current-voltage behavior in full P3HT/PCBM OPVs, was dependent on both (i) the porosity of the sg-ZnO or sp-ZnO films (as revealed by probe molecule electrochemistry) and (ii) the apparent enrichment of PCBM at ZnO/P3HT:PCBM interfaces, both effects conveniently revealed by electrochemical characterization. We anticipate that these approaches will be applicable to a wider array of solution-processed interlayers for "printable" solar cells.

Electrodeposition Zinc-Oxide Inverse Opal and Its Application in Hybrid Photovoltaics

A Facile Self-assembly Synthesis of Hexagonal ZnO Nanosheet Films and Their Photoelectrochemical Properties

Towards Transparent Conductive Zinc Oxide Films As Effective Anodes in Organic Photovoltaics

Synthesis of ZnO Inverse Opals with High Crystalline Quality by a Three-Dimensional Colloidal Crystal Template-Assisted Hydrothermal Method over a Seed Layer

Indium-Doped Zinc Oxide Thin Films As Effective Anodes of Organic Photovoltaic Devices

Application of Three-Dimensional ZnO Inverse Photonic Crystal in Dye-Sensitized Solar Cells

Electrodeposited Nanoporous ZnO Films Exhibiting Enhanced Performance in Dye-Sensitized Solar Cells

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells

High Electron Mobility Zno Film for High-Performance Inverted Polymer Solar Cells

Zinc Oxide Modified with Benzylphosphonic Acids as Transparent Electrodes in Regular and Inverted Organic Solar Cell Structures

Approach to A Block Polymer Precursor from Poly(3-Hexylthiophene) Nitroxide-Mediated in Situ Polymerization for Stabilization of Poly(3-Hexylthiophene)/Zno Hybrid Solar Cells

Fabrication of in Doped ZnO Thin Films by Spray Pyrolysis As Photoanode in DSSCs

Designed Polar Cosolvent‐Prepared Zinc Oxide Film for Efficient and Stable Inverted Organic Solar Cells

Characterization of ZnO Interlayers for Organic Solar Cells: Correlation of Electrochemical Properties with Thin-Film Morphology and Device Performance

Morphology and Optical Properties of Poly (3_hexylthiophene) and ZnO Micro/Nanospheres Composite Films

Fine dispersion and self-assembly of ZnO nanoparticles driven by P3HT-b-PEO diblocks for improvement of hybrid solar cells performance

Tuning of the Morphology and Optoelectronic Properties of ZnO/P3HT/P3HT- B-Peo Hybrid Films Via Spray Deposition Method.

The Application of ZnO Nanoparticles Containing Polyoxometalates in Dye‐Sensitized Solar Cells

Physical properties of 2D and 3D ZnO materials fabricated by multi-methods and their photoelectric effect on organic solar cells

Increased Electron Transport and Hole Blocking in an Aqueous Solution Processed Dye-Doped ZnO Cathode Interlayer for High Performance Organic Solar Cells

Electrical and Optical Properties of Zno Processed by Atomic Layer Deposition in Inverted Polymer Solar Cells