Abstract:In this paper, we reviewed recent systematic studies of using ZnO nanotetrapods for photoanodes of dye-sensitized solar cells (DSSCs) in our group. First, the efficiency of power conversion was obtained by more than 3.27% by changes of conditions of dye loading and film thickness of ZnO nanotetrapod. Short-circuit photocurrent densities (J sc) increased with the film thickness, J sc would not be saturation even the film thickness was greater than 35 μm. The photoanode architecture had been charactered by good crystallinity, network forming ability, and limited electron-hopping interjunctions. Next, DSSCs with high efficiency was devised by infiltrating SnO2 nanoparticles into the ZnO nanotetrapods photoanodes. Due to material advantages of both constituents described as above, the composite photoanodes exhibited extremely large roughness factors (RF s), good charge collection, and tunable light scattering properties. By varying the composition of the composite photoanodes, we had achieved an efficiency of 6.31% by striking a balance between high efficiency of charge collection for SnO2 nanoparticles rich films and high light scattering ability for ZnO nanotetrapods rich films. An ultrathin layer of ZnO was found to form spontaneously on the SnO2 nanoparticles, which primarily was responsible for enhancing open-circuit photovoltage (V oc). We also identified that recombination in SnO2/ZnO composite films was mainly determined by ZnO shell condition on SnO2, whereas electron transport was greatly influenced by the morphologies and sizes of ZnO crystalline additives. Finally, we applied the composite photoanodes of SnO2 nanoparticles/ZnO nanotetrapods to flexible DSSCs by low temperature technique of “acetic acid gelation-mechanical press-ammonia activation.” The efficiency has been achieved by 4.91% on ITO-coated polyethylenenaphtalate substrate. The formation of a thin ZnO shell on SnO2 nanoparticles, after ammonia activation, was also found to be critical to boosting V oc and to improving inter-particles contacts. Mechanical press, apart from enhancing film durability, also significantly improved charge collection. ZnO nanotetrapods had been demonstrated to be a better additive than ZnO particles for the improvement of charge collection in SnO2/ZnO composite photoanodes regardless of whether they were calcined.

Electrodeposited Nanoporous ZnO Films Exhibiting Enhanced Performance in Dye-Sensitized Solar Cells

Cathodic Electrodeposition of Nanocrystalline ZnO Films for Dye-Sensitized Solar Cell Applications

Enhanced Electron Extraction Using ZnO/ZnO-SnO2 Solid Double-Layer Photoanode Thin Films for Efficient Dye Sensitized Solar Cells

ZnO Thin Film Prepared by Two-Step Electrodeposition Method for Dye-Sensitized Solar Cell

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

Electrochemical synthesis of a double‐layer film of ZnO nanosheets/nanoparticles and its application for dye‐sensitized solar cells

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

ZnO Porous Plate Films Application in Quantum Dot Sensitized Solar Cells

<font>ZnO</font> NANOPOROUS DISK–<font>TiO</font><sub>2</sub> NANOPARTICLE HYBRID FILM ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS

Enhanced Photovoltaic Performance of Dye-Sensitized Solar Cells Based on ZnO Microrod Array/tio2 Nanoparticle Hybrid Films

Hydrothermal Growth of ZnO Nanowires Scaffolds Within Mesoporous TiO2 Photoanodes for Dye-Sensitized Solar Cells with Enhanced Efficiency

Single-crystalline Porous ZnO Nanosheet Frameworks for Efficient Fully Flexible Dye-Sensitized Solar Cells

Dye-Sensitized Solar Cells With Composite Zno/Sno2 Nanoporous Electrodes

ZnO NANOPOROUS DISK–TiO2 NANOPARTICLE HYBRID FILM ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS

Dye-sensitized solar cells based on ZnO nanotetrapods

Electrodeposition Combination with Hydrothermal Preparation of Zno Films and Their Application in Dye-Sensitized Solar Cell

Flower-like Nanostructured ZnO for Dye-Sensitized Solar Cell Applications

Electro-hydrodynamic Fabrication of ZnO-based Dye Sensitized Solar Cells

Improvement of the Performance and Stability of the Zno Nanoparticulate Film Electrode by Surface Modification for Dye-Sensitized Solar Cells

Performances of ZnO-Based Dye Sensitized Solar Cells Fabricated by Hydrothermal Synthesis and Sol-Gel Technique

Electrodeposition Of Hierarchical Zno Nanorod-Nanosheet Structures And Their Applications In Dye-Sensitized Solar Cells