Abstract:The high electronic-mobility ZnO was developed as binder with a mesoporous carbon (MC) as catalytic material to fabricate a novel ZnO-MC counter electrode through in-situ formation technique. The homogeneous MC blended paste containing the ZnO sol was first coated on the conductive substrate, and then annealed in ambient atmosphere to obtain the ZnO-MC electrode. The annealing temperature is a key factor to obtain the high-performance ZnO-MC electrode. When annealed at 300 degrees C, the in-situ formed and dispersed ZnO nanoparticles are functioned as bridges to bind the MC particles and to strengthen the adhesion of the carbon film to the substrate, providing enough conductive paths for the transportation of the electrons to participate timely in the reduction of tri-iodide (I-3(-)), and further improving the electrochemical performances of the electrode. As a result, the efficiency of the ZnO-MC electrode for use in dye-sensitized solar cells (DSCs) enhances from 2.5% to 6.37% compared with the binder-free MC electrode. Importantly, the ZnO-MC electrode exhibits higher catalytic activity for the I-3(-) reduction than the MC electrode using carboxymethyl cellulose (CMC) as binder, leading to an increase of 14.2% in the efficiency of the cell, which is mainly from the high electronic-mobility of the ZnO. Furthermore, the efficiency of the low cost ZnO-MC based DSCs reaches 90.4% of that of the Pt based ones. Noted that compared with the Pt electrode, the ZnO-MC electrode is beneficial to obtain a device with higher open-circuit voltage. (C) 2013 Elsevier Ltd. All rights reserved.

<font>ZnO</font> NANOPOROUS DISK–<font>TiO</font><sub>2</sub> NANOPARTICLE HYBRID FILM ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS

ZnO NANOPOROUS DISK–TiO2 NANOPARTICLE HYBRID FILM ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Enhanced Photovoltaic Performance of Dye-Sensitized Solar Cells Based on ZnO Microrod Array/tio2 Nanoparticle Hybrid Films

Hybrid photoanode films based on sparse ZnO rod array-TiO 2 nanoparticles in dye-sensitized solar cells

Hydrothermal Growth of ZnO Nanowires Scaffolds Within Mesoporous TiO2 Photoanodes for Dye-Sensitized Solar Cells with Enhanced Efficiency

Electrodeposited Nanoporous ZnO Films Exhibiting Enhanced Performance in Dye-Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

Preparation and Performance of Dye-Sensitized Solar Cells Based on Zno-Modified Tio2 Electrodes

Zn-doped TiO2 electrodes in dye-sensitized solar cells for enhanced photocurrent

In-situ Formation of Dispersed ZnO Nanoparticles in Mesoporous Carbon Counter Electrode for Efficient Dye-Sensitized Solar Cells

Zinc-Doping in TiO<sub>2 </sub>Films to Enhance Photovoltaic Performance of Dye-Sensitized Solar Cells

Synthesis of Cauliflower-Like ZnO–TiO2 Composite Porous Film and Photoelectrical Properties

Dye Sensitized Solar Cells Based on ZnO Nanorod/TiO<sub>2</sub> Nanoparticle Composite Films

Efficient Dye-Sensitized Solar Cells Composed of Nanostructural ZnO Doped with Ti

PREPARATION OF NANOCRYSTALLINE <font>ZnO/TiO<sub>2</sub></font> FILM AND ITS APPLICATION TO DYE-SENSITIZED SOLAR CELLS

TiO2 NANOTUBE AS ADDITIVE TO TiO2 FILM FOR IMPROVING PERFORMANCE OF DYE-SENSITIZED SOLAR CELLS

Electron Transportation in the Tio2/Zno Film Electrodes and Application for Dye-Sensitized Solar Cells

TiO<sub>2</sub> micro/nano-composite structured electrodes for quasi-solid-state dye-sensitized solar cells

Synthesis of Zn-doped TiO2 Microspheres with Enhanced Photovoltaic Performance and Application for Dye-Sensitized Solar Cells